Snyder Industries 2500 Gallon XLPE Cone Bottom Tank — Product Video

Video transcript

Built for chemical service that water-rated tanks cannot handle... molded from crosslinked linear polyethylene (XLPE) with a 1.5 specific gravity rating. It holds 2,500 gallons, stands 104 inches tall. The full cone-bottom geometry drains completely... it matters for batching, dosing, and process chemicals where residue or settled solids defeat flat bottoms. Filled with water it carries 20,850 lb; at its full 1.5 SG rating contents reach 31,275 lb. Cone-bottom carries its entire load on the stand, so the stand and pad must be rated for the heavier figure. Most services use PVC fittings with EPDM gaskets; acetic acid and urea allow PP or PVC; DEF at 32.5% requires 316 stainless steel fittings—spec 316SS at every wetted port. Snyder Industries 2500 Gallon XLPE Cone Bottom Tank. Drains Completely. OneSource Plastics.