65-gallon black storage tank built for safe potable water storage. Manufactured by Bushman from virgin linear polyethylene (HDPE) rated to handle liquids up to 8.3 pounds per gallon. Dual FDA and NSF 61 certified — one of the few tanks approved for both potable water and food-grade liquid storage.
The 65 Gallon Black Vertical Water Storage Tank is designed for homeowners, hobbyists, small farms, and mobile applications where compact size matters. At 65 gallons, this is the kind of tank you keep close at hand — on the workbench, mounted to equipment, or tucked in a utility closet. It is compact enough to place anywhere but built to the same standards as tanks ten times its size.
Constructed from virgin linear polyethylene (HDPE) using a single-piece rotational molding process that eliminates seams, weld lines, and potential leak points. Rated for liquids at 1.0 specific gravity (8.3 pounds per gallon), this tank is optimized for water storage with wall thickness calibrated for standard water weight. UV-resistant black pigmentation provides maximum outdoor durability and inhibits algae growth in stored liquids. Maximum operating temperature is 120° F / 48° C, with UV stabilizers compounded directly into the resin for outdoor service life.
This tank measures 31 inches tall with a 26-inch diameter, requiring 3.7 square feet of level ground. Empty weight is 40 pounds. At full capacity with a 1.0 SG liquid, expect approximately 582 pounds on the foundation. Set on a flat, level pad of compacted gravel or a concrete slab at least 4 inches thick. Place on a firm, level surface free of rocks or sharp objects that could damage the tank bottom. Ensure adequate ventilation if stored chemicals produce vapors.
Comes equipped with a 1" PP Female NPT Bulkhead Fitting NPT outlet fitting installed at the factory. No inlet fitting is included — drill and install a bulkhead fitting at your preferred height for your specific plumbing layout. The 12" Threaded Lid lid accommodates fill lines, vent connections, and basic interior access for inspection. Standard garden hose adapter or direct NPT connection works well for tanks this size.
Bushman USA specializes in innovative water storage solutions designed for maximum durability and aesthetic appeal. Their tanks feature patented designs optimized for residential and commercial rainwater harvesting applications. Backed by a 3-year manufacturer warranty from Bushman against defects in materials and workmanship under normal use conditions. FDA approved for contact with potable water and food-grade liquids. NSF/ANSI 61 certified for potable water system components. Every tank is inspected before it leaves the production floor — and we inspect it again before it ships from our facility.
- 65-gallon capacity — sized for safe potable water storage
- Constructed from virgin linear polyethylene (HDPE) with 1.0 specific gravity rating — handles liquids up to 8.3 lbs/gal
- 31" tall x 26" diameter — compact vertical footprint
- 40 lbs empty, approximately 582 lbs when full at rated specific gravity
- 1" PP Female NPT Bulkhead Fitting NPT outlet fitting — factory installed and leak-tested
- 12" Threaded Lid lid opening for fill, venting, and interior access
- FDA approved for potable water and food-grade liquid contact
- NSF/ANSI 61 certified for drinking water system components
- 3 Year Warranty from Bushman against manufacturing defects
- UV-resistant black pigmentation provides maximum outdoor durability and inhibits algae growth in stored liquids
- Rated for continuous service up to 120° F / 48° C
- Seamless one-piece rotational molding — no seams, no welds, no leak points
- Manufactured by Bushman — a leading name in rotomolded polyethylene tanks
- Place on a firm, level surface free of rocks or sharp objects that could damage the tank bottom. Ensure adequate ventilation if stored chemicals produce vapors
- Ships via UPS or FedEx ground — typically arrives within 5-7 business days
This is an atmospheric water storage tank. Not designed to be pressurized. For pressurized applications, consult OneSource Plastics at 866-418-1777.
