1,400-gallon natural white horizontal leg tank built for heavy-duty industrial chemical containment. Manufactured by Enduraplas from virgin linear polyethylene (HDPE) rated to handle liquids up to 15.8 pounds per gallon. FDA approved for contact with potable water, ensuring safe storage for drinking water and food-grade liquids.
The 1400 Gallon White Horizontal Leg Tank is designed for commercial operations, agricultural producers, and industrial facilities with serious storage demands. This 1,400-gallon horizontal configuration keeps the center of gravity low, making it ideal for transport applications or stationary installations where height clearance is limited. The horizontal profile also works well for gravity-feed systems and low-profile installations.
Constructed from virgin linear polyethylene (HDPE) using a single-piece rotational molding process that eliminates seams, weld lines, and potential leak points. The 1.9 specific gravity rating means this tank is built with significantly heavier wall sections than a standard water tank — necessary to safely contain liquids weighing up to 15.8 pounds per gallon. That extra wall thickness is not optional when you are storing aggressive industrial chemicals. Translucent white walls allow visual level monitoring without opening the tank and reflect sunlight to keep contents cooler. UV stabilizers are compounded directly into the resin — not a surface coating — for outdoor service life that lasts the full warranty period and beyond.
This tank measures 102 inches long by 70 inches wide and 66 inches tall, requiring 49.6 square feet of level ground. Empty weight is 561 pounds. At full capacity with a 1.9 SG liquid, expect approximately 22,745 pounds on the foundation. Requires an engineered reinforced concrete foundation designed by a structural professional for the full loaded weight. Horizontal tanks must be supported by saddles or cradles rated for the full loaded weight. Never use narrow supports that create point loads on the tank wall.
Comes equipped with a 2" PP Female NPT Bulkhead Fitting NPT outlet fitting installed at the factory. No inlet fitting is included — drill and install a bulkhead fitting at your preferred height for your specific plumbing layout. Use schedule 80 PVC or stainless steel bulkhead fittings on the 2" NPT connections. Install a full-port ball valve and consider a Y-strainer to protect downstream equipment.
Dura-Cast Products manufactures rotationally molded polyethylene tanks engineered for demanding agricultural and industrial applications. Their tanks feature optimized wall thickness and premium UV-stabilized resins. Backed by a 10-year manufacturer warranty from Enduraplas against defects in materials and workmanship under normal use conditions. FDA approved for contact with potable water and food-grade liquids. Every tank is inspected before it leaves the production floor — and we inspect it again before it ships from our facility.
- 1,400-gallon capacity — sized for heavy-duty industrial chemical containment
- Constructed from virgin linear polyethylene (HDPE) with 1.9 specific gravity rating — handles liquids up to 15.8 lbs/gal
- 102" long x 70" wide x 66" tall
- 561 lbs empty, approximately 22,745 lbs when full at rated specific gravity
- 2" PP Female NPT Bulkhead Fitting NPT outlet fitting — factory installed and leak-tested
- FDA approved for potable water and food-grade liquid contact
- 10 Year Warranty withActivation from Enduraplas against manufacturing defects
- Translucent white walls allow visual level monitoring without opening the tank and reflect sunlight to keep contents cooler
- Seamless one-piece rotational molding — no seams, no welds, no leak points
- Manufactured by Enduraplas — a leading name in rotomolded polyethylene tanks
- Horizontal tanks must be supported by saddles or cradles rated for the full loaded weight. Never use narrow supports that create point loads on the tank wall
- Ships via LTL freight — allow 2-3 weeks for delivery. Lift gate and residential delivery available at additional cost
