1,100-gallon black storage tank built for agricultural chemical and fertilizer storage. Manufactured by Snyder from virgin linear polyethylene (HDPE) rated to handle liquids up to 12.5 pounds per gallon. Dual FDA and NSF 61 certified — one of the few tanks approved for both potable water and food-grade liquid storage.
The 1100 Gallon ASTM Black Vertical Storage Tank is designed for commercial operations, agricultural producers, and industrial facilities with serious storage demands. With 1,100 gallons of storage capacity, this tank serves as the backbone of serious agricultural chemical and fertilizer storage operations. It handles the volume demands of commercial and agricultural applications where running out of supply is not an option.
Constructed from virgin linear polyethylene (HDPE) using a single-piece rotational molding process that eliminates seams, weld lines, and potential leak points. Rated to 1.5 specific gravity, this tank handles liquids up to 12.5 pounds per gallon — covering the full range of agricultural chemicals, liquid fertilizers, and most industrial solutions. The wall thickness is engineered specifically for this density range. UV-resistant black pigmentation provides maximum outdoor durability and inhibits algae growth in stored liquids. Maximum operating temperature is 120° F / 48° C, with UV stabilizers compounded directly into the resin for outdoor service life.
This tank measures 90 inches tall with a 64-inch diameter, requiring 22.3 square feet of level ground. Empty weight is 300 pounds. At full capacity with a 1.5 SG liquid, expect approximately 14,061 pounds on the foundation. Requires an engineered reinforced concrete foundation designed by a structural professional for the full loaded weight. Install on a level, compacted surface. Ensure adequate clearance above for lid access and around the perimeter for plumbing connections and visual inspection.
This tank ships without pre-installed fittings, giving you full flexibility to position inlet and outlet connections exactly where your plumbing layout requires. Use polyethylene-compatible bulkhead fittings for all penetrations. The 18" Threaded Vented Manway lid opening provides ample access for interior inspection, cleaning, and installation of float switches, level sensors, or submersible pumps. Use schedule 80 PVC or stainless steel bulkhead fittings on the NPT connections. Install a full-port ball valve and consider a Y-strainer to protect downstream equipment.
Snyder Industries has been a leader in polyethylene tank manufacturing for over 60 years. Their Lincoln, Nebraska facility produces tanks using advanced rotational molding processes with rigorous quality control at every step. Backed by a 3-year manufacturer warranty from Snyder against defects in materials and workmanship under normal use conditions. FDA approved for contact with potable water and food-grade liquids. NSF/ANSI 61 certified for potable water system components. Every tank is inspected before it leaves the production floor — and we inspect it again before it ships from our facility.
- 1,100-gallon capacity — sized for agricultural chemical and fertilizer storage
- Constructed from virgin linear polyethylene (HDPE) with 1.5 specific gravity rating — handles liquids up to 12.5 lbs/gal
- 90" tall x 64" diameter — compact vertical footprint
- 300 lbs empty, approximately 14,061 lbs when full at rated specific gravity
- 18" Threaded Vented Manway lid opening for fill, venting, and interior access
- FDA approved for potable water and food-grade liquid contact
- NSF/ANSI 61 certified for drinking water system components
- 3 Year Warranty from Snyder against manufacturing defects
- UV-resistant black pigmentation provides maximum outdoor durability and inhibits algae growth in stored liquids
- Rated for continuous service up to 120° F / 48° C
- Seamless one-piece rotational molding — no seams, no welds, no leak points
- Manufactured by Snyder — a leading name in rotomolded polyethylene tanks
- Install on a level, compacted surface. Ensure adequate clearance above for lid access and around the perimeter for plumbing connections and visual inspection
- Ships via LTL freight — allow 2-3 weeks for delivery. Lift gate and residential delivery available at additional cost
