62-gallon natural white storage tank built for safe potable water and liquid storage. Manufactured by Chem-Tainer from virgin linear polyethylene (HDPE) rated to handle liquids up to 8.3 pounds per gallon. Dual FDA and NSF 61 certified — one of the few tanks approved for both potable water and food-grade liquid storage.
The 62 Gallon PE Rectangular Open Top Tank is designed for homeowners, hobbyists, small farms, and mobile applications where compact size matters. At 62 gallons, this is the kind of tank you keep close at hand — on the workbench, mounted to equipment, or tucked in a utility closet. It is compact enough to place anywhere but built to the same standards as tanks ten times its size.
Constructed from virgin linear polyethylene (HDPE) using a single-piece rotational molding process that eliminates seams, weld lines, and potential leak points. Rated for liquids at 1.0 specific gravity (8.3 pounds per gallon), this tank is optimized for water storage with wall thickness calibrated for standard water weight. Translucent white walls allow visual level monitoring without opening the tank and reflect sunlight to keep contents cooler. Maximum operating temperature is 120° F / 48° C, with UV stabilizers compounded directly into the resin for outdoor service life.
This tank measures 20 inches long by 36 inches wide and 20 inches tall, requiring 5.0 square feet of level ground. Empty weight is 33 pounds. At full capacity with a 1.0 SG liquid, expect approximately 550 pounds on the foundation. Set on a flat, level pad of compacted gravel or a concrete slab at least 4 inches thick. Place on a firm, level surface free of rocks or sharp objects that could damage the tank bottom. Ensure adequate ventilation if stored chemicals produce vapors.
This tank ships without pre-installed fittings, giving you full flexibility to position inlet and outlet connections exactly where your plumbing layout requires. Use polyethylene-compatible bulkhead fittings for all penetrations. The 8" lid accommodates fill lines, vent connections, and basic interior access for inspection. Standard garden hose adapter or direct NPT connection works well for tanks this size.
Chem-Tainer Industries has manufactured chemical-resistant polyethylene tanks in the USA since 1957. Their tanks are specifically engineered for chemical storage applications with wall thicknesses and resin formulations matched to the demands of aggressive chemicals. Backed by a 3-year manufacturer warranty from Chem-Tainer against defects in materials and workmanship under normal use conditions. FDA approved for contact with potable water and food-grade liquids. NSF/ANSI 61 certified for potable water system components. Every tank is inspected before it leaves the production floor — and we inspect it again before it ships from our facility.
- 62-gallon capacity — sized for safe potable water and liquid storage
- Constructed from virgin linear polyethylene (HDPE) with 1.0 specific gravity rating — handles liquids up to 8.3 lbs/gal
- 20" long x 36" wide x 20" tall
- 33 lbs empty, approximately 550 lbs when full at rated specific gravity
- 8" lid opening for fill, venting, and interior access
- FDA approved for potable water and food-grade liquid contact
- NSF/ANSI 61 certified for drinking water system components
- 3 Year Warranty from Chem-Tainer against manufacturing defects
- Translucent white walls allow visual level monitoring without opening the tank and reflect sunlight to keep contents cooler
- Rated for continuous service up to 120° F / 48° C
- Seamless one-piece rotational molding — no seams, no welds, no leak points
- Manufactured by Chem-Tainer — a leading name in rotomolded polyethylene tanks
- Place on a firm, level surface free of rocks or sharp objects that could damage the tank bottom. Ensure adequate ventilation if stored chemicals produce vapors
- Ships via UPS or FedEx ground — typically arrives within 5-7 business days
