325-gallon black horizontal leg tank built for agricultural chemical and fertilizer storage. Manufactured by Norwesco from virgin linear polyethylene (HDPE) rated to handle liquids up to 12.5 pounds per gallon. Dual FDA and NSF 61 certified — one of the few tanks approved for both potable water and food-grade liquid storage.
The 325 Gallon Black Horizontal Leg Tank is designed for farms, ranches, small businesses, and residential properties needing reliable mid-range liquid storage. This 325-gallon horizontal configuration keeps the center of gravity low, making it ideal for transport applications or stationary installations where height clearance is limited. The horizontal profile also works well for gravity-feed systems and low-profile installations.
Constructed from virgin linear polyethylene (HDPE) using a single-piece rotational molding process that eliminates seams, weld lines, and potential leak points. Rated to 1.5 specific gravity, this tank handles liquids up to 12.5 pounds per gallon — covering the full range of agricultural chemicals, liquid fertilizers, and most industrial solutions. The wall thickness is engineered specifically for this density range. UV-resistant black pigmentation provides maximum outdoor durability and inhibits algae growth in stored liquids. Maximum operating temperature is 120° F / 48° C, with UV stabilizers compounded directly into the resin for outdoor service life.
This tank measures 68 inches long by 38 inches wide and 43 inches tall, requiring 17.9 square feet of level ground. Empty weight is 99 pounds. At full capacity with a 1.5 SG liquid, expect approximately 4,165 pounds on the foundation. Requires a reinforced concrete pad designed for the full loaded weight, with at least 6 inches of compacted gravel sub-base. Place on a firm, level surface free of rocks or sharp objects that could damage the tank bottom. Ensure adequate ventilation if stored chemicals produce vapors.
Comes equipped with a 2" PP Female NPT Bulkhead Fitting NPT outlet fitting installed at the factory. No inlet fitting is included — drill and install a bulkhead fitting at your preferred height for your specific plumbing layout. The 16" Threaded Vented Manway lid opening provides ample access for interior inspection, cleaning, and installation of float switches, level sensors, or submersible pumps. We recommend schedule 80 PVC or polypropylene fittings on the 2" NPT outlet with a ball valve for positive shutoff.
Norwesco is the largest manufacturer of rotationally molded poly tanks in North America, operating over 20 manufacturing plants across the U.S. and Canada. Every tank is produced from proprietary resin formulations and backed by decades of rotomolding expertise. Backed by a 3-year manufacturer warranty from Norwesco against defects in materials and workmanship under normal use conditions. FDA approved for contact with potable water and food-grade liquids. NSF/ANSI 61 certified for potable water system components. Every tank is inspected before it leaves the production floor — and we inspect it again before it ships from our facility.
- 325-gallon capacity — sized for agricultural chemical and fertilizer storage
- Constructed from virgin linear polyethylene (HDPE) with 1.5 specific gravity rating — handles liquids up to 12.5 lbs/gal
- 68" long x 38" wide x 43" tall
- 99 lbs empty, approximately 4,165 lbs when full at rated specific gravity
- 2" PP Female NPT Bulkhead Fitting NPT outlet fitting — factory installed and leak-tested
- 16" Threaded Vented Manway lid opening for fill, venting, and interior access
- FDA approved for potable water and food-grade liquid contact
- NSF/ANSI 61 certified for drinking water system components
- 3 Year Warranty from Norwesco against manufacturing defects
- UV-resistant black pigmentation provides maximum outdoor durability and inhibits algae growth in stored liquids
- Rated for continuous service up to 120° F / 48° C
- Seamless one-piece rotational molding — no seams, no welds, no leak points
- Manufactured by Norwesco — a leading name in rotomolded polyethylene tanks
- Place on a firm, level surface free of rocks or sharp objects that could damage the tank bottom. Ensure adequate ventilation if stored chemicals produce vapors
- Ships via LTL freight on a pallet — residential delivery with lift gate available
