Ronco Marine Water Tanks

The Ronco Plastics B317 is a 45-gallon marine fresh water tank in a long, low-slung molding built to follow a hull run - the format for sailboats and cruisers whose usable space is a shallow corridor...

Fifty inches long and 16 x 16 in section, the B416 is the tank you run fore-and-aft along a keel line or tuck against a stringer where a boxier 50 gallon shell would never fit. The long, narrow...

Eleven and three-quarter inches of height is the headline on the Ronco Plastics B465. This 50 gallon dual-role tank spreads its capacity across a 59.75 x 18.5 x 11.75 inch footprint, long and...

Look at the ratio on the B420 before anything else: 27 gallons of capacity carried in an 89 lb molding. That is a lot of polyethylene per gallon, and it is the point - this is the workboat-grade end...

Fifty-eight gallons is liveaboard territory - showers, dishes, a week between fills - and the BOAT42W delivers it in a 46.75 x 20.75 x 15.5 inch block proportioned for the cavity under a large berth...

A perfect 34 x 34 inch square, 13 inches tall: the BOAT44W is the 58-gallon tank for boats whose spare volume is square rather than long - beneath a V-berth insert, in a deck box, centered over the...

Sixty gallons in a block just over 36 x 30.25 x 14.25 inches: the BOAT54W is one of the two largest-capacity rectangles in Ronco's heavy-duty marine series, shaped wide rather than long. That...

The BOAT59W is the deep-format 60-gallon tank in Ronco's heavy-duty marine line: 40 x 25 x 15.5 inches, a substantial block for boats with a proper tank bay or a deep under-berth cavity. Alongside...

At 44 x 22 x 15.5 inches, the BOAT60W is the balanced middle of Ronco's 58-gallon marine family - not the longest, not the squarest, not the shallowest, but the set of proportions most likely to fit...

The BOAT63W rounds out Ronco's 58-gallon marine family at 42 x 23 x 15.5 inches - fractionally shorter and beamier than its closest sibling, which is exactly why it exists. At this capacity Ronco...

The Ronco Plastics B176 is a 45 gallon marine fresh water tank, and its 117 lb ship weight tells you something before the spec sheet does: this is a substantial molding, built for the permanent,...

At 46 lb for 48 gallons of capacity, the Ronco Plastics B293 is a manageable one-person install that still holds a serious week of fresh water. That ratio - light shell, big volume - is what makes...