Channelizer Drums & Delineators

The Black End Cap (SKU 04-48-BEC) is a replacement top cap for Tubular Surface Mount Delineators. It seals the top of a tubular marker, closing off the tube interior and finishing the assembly for a clean, complete unit. Impact-Resistant...

The Butyl Pad is the adhesive mounting base for OneSource Plastics' Tubular Surface Mount Delineators, giving crews a fast, drill-free way to anchor a tubular delineator directly to pavement. When surface conditions rule out mechanical fasteners, this...

The Rubber Tire Ring Base is a weighted foundation built for the TrailBOSS Channelizer Drum, sized to fit drums with a 22-inch inside diameter. At 25 pounds, it drops over the drum bottom to help hold your channelizer upright and in position through...

The Weighted Tire Ring Base (part 03-732WR) is a ballast component for TrailBOSS and TrailGuide channelizer drums, available in Canada only. At 18 pounds, this molded polyethylene ring adds mass to the drum setup to help keep it planted in active work...

The Black Base for Tubular Markers is the universal surface-mount foundation that anchors tubular delineators to pavement without a permanent dig-in installation. Sized to fit all standard tubular marker sizes, this single base lets fleet, facility, and...

The EZGrab Recycled Square Rubber Base (SKU 03-730) is a 10 lb weighted base for the EZGrab delineator system. Molded from recycled rubber, this square base is one of the EZGrab base options and anchors delineators for both portable and permanent setups...

The EZGrab Recycled Hexagon Rubber Base is the anchoring foundation for OneSource Plastics' EZGrab permanent and portable delineator system. This 10-lb. hexagonal base is molded from recycled rubber, giving crews and facility teams a stable platform that...

The EZGrab 45" Flared Delineator Post (SKU 03-740) is a single orange delineator unit for roadway marking and lane delineation. It ships as the 45-inch flared EZ Grab post in orange with no collars, and works with either a portable or permanent base...

The Round Top Channelizer (SKU 03-770-36-P) is a 36" round-top orange channelizer cone for lane delineation and work-zone traffic control. Molded from high density polyethylene with UV stabilization to resist fading, it ships as a bare cone with no...

The EZGrab Recycled Hexagon Rubber Base is a 12 lb. portable weighted base that holds EZGrab perimeter and channelizing delineators upright in active work zones and permanent traffic-control layouts. Molded from recycled rubber in a hexagonal footprint,...

The EZGrab 45" Flared Blue Post (SKU 03-740B) is a single delineator post unit built for DOT contractors and safety crews who need durable channelization that stands up to repeated impacts. This configuration ships as a standalone flared blue post with...

The EZGrab 45" Flared Yellow Post (SKU 03-740Y) is a single delineator from the EZGrab Permanent & Portable line, built for DOT crews and facility teams marking lanes, hazards, and work zones. This unit ships as the 45-inch flared post in yellow with...