Barricades

The Adaptor for Boards is a small but essential accessory in the A-Frame and P-Cade sign system, letting crews mount signboards that would not otherwise seat directly in the standard A-Frame slots. At roughly one pound, it bridges the gap between your...

The Steelcade Cross Bar is a single 14-gauge steel bar finished in black powder-coat, offered as an add-on component for the Steelcade Barricade system. Steelcades are built with steel legs and plastic panels, and this cross bar is a steel member of that...

The T3 Kits Hardware Kit (SKU 97-1700KT) is part of the Telespar Type III barricade line built for work-zone traffic control. It supplies the components that assemble into a finished Type III barricade for lane closures, road construction, and detour...

The M-Cade "Tall Boy" Leg (SKU 97-1200) is a single 60" plastic leg that converts a standard M-Cade modular barricade into a taller, tall-boy configuration. Sold one leg at a time, it lets DOT contractors and work-zone crews add only the legs a given...

The T-Boards 1" x 8" 4 ft board is the unsheeted base board, molded from High Density Polyethylene (HDPE) and ready for you to apply the striped or chevron sheeting your job specifies. This is the no-sheeting version. Material and configuration Because...

The T-Boards 1" x 8" in the 6-foot unsheeted configuration is a bare High Density Polyethylene (HDPE) board that ships with no sheeting applied, giving fleet and work-zone crews a clean base to add their own reflective sheeting or set up chevron panels...

The T-Boards 1" x 8" unsheeted board is an 8-foot panel molded from High Density Polyethylene (HDPE), supplied blank with no sheeting applied. It is the base board you start from when you need to specify your own sheeting orientation or run a Chevron...

The T-Board in the 1" x 8" profile is a work-zone sign board made of high-density polyethylene (HDPE). This configuration ships as a 4-foot board sheeted on a single side with Engineer Grade striped sheeting, giving crews a durable, panel-mount marker...

The T-Boards 2" x 8" Unsheeted Board is a 4-foot, no-sheeting barricade panel built to earn the "T" for TOUGH. Extruded from exterior-grade PVC, it gives DOT contractors and work-zone crews a rugged, weather-ready base panel ready to be configured with...

The T-Boards 1" x 8" is a work-zone barricade panel used to channel traffic and mark hazards. This configuration ships as a 4-foot board sheeted on one side with high-intensity prismatic striped sheeting. Made of High Density Polyethylene, the board...

The T-Boards 1" x 8" in the 10 ft unsheeted configuration is a High Density Polyethylene (HDPE) board supplied with no sheeting applied. As a bare 10-foot 1" x 8" board, it serves as the base component you configure with the sheeting option that fits...

The T-Board 1" x 8" is a High-Density Polyethylene (HDPE) board on a 6-foot length, sheeted on one side with 6"-wide Engineer Grade striped sheeting. Built for work-zone and traffic-control channelizing, it gives DOT crews and safety managers a durable,...