Snyder Industries Tanks in Lincoln, NE

The 14 Inch Strainer Basket is a Snyder Industries polypropylene basket for rainwater harvesting setups. It measures 14 by 14 inches across the top with a 5 inch depth, weighs about 5 pounds, and is...

The 10 Inch Vented Cap from Snyder Industries is a threaded polyethylene lid, molded in high density linear polyethylene, that closes off a 10-inch threaded opening on a poly tank. It measures 10...

The Snyder Industries 3 Inch Threaded Vent is a polypropylene vent cap body that threads into a matching 3-inch fitting on your tank. Read the name plainly: this listing is for the vent cap only and...

The 1 Inch PVC Flange Adapter (SII-34700867) from Snyder Industries is a PVC pipe-assembly fitting, not a storage tank. It carries a 1-inch nominal size and ships as a compact piece at about 5 lb,...

The 3/4 Inch PP Threaded Bulkhead Fitting is a Snyder Industries polypropylene through-wall connection with a 3/4 inch threaded port and an EPDM gasket. At roughly 2 lbs, it makes a clean,...

The Snyder 1 Inch PVC Bulkhead Fitting is a socket-by-thread port fitting that creates a sealed penetration through a tank wall. It is molded from black PVC and ships with an EPDM gasket. At a...

The 2 Inch PVC Flange Adapter from Snyder Industries is a pipe-assembly fitting, not a storage vessel. It is molded from PVC around a 2-inch adapter body, listed at roughly 14 in. tall on a 6 x 6 in...

The 1 Inch PP Threaded Bulkhead with EPDM Gasket is a Snyder Industries tank fitting, not a tank. It gives you a leak-sealed 1-inch threaded port through a poly tank wall, molded in polypropylene...

The Snyder Industries 1.5 Inch PP Threaded Bulkhead is a polypropylene tank fitting with an EPDM gasket that creates a sealed 1.5-inch threaded connection through a tank wall. It gives you a defined...

The 3/4 Inch PVC Bulkhead Fitting from Snyder Industries is a socket-by-thread port assembly that seals a controlled outlet through a tank wall. It is molded in PVC at a 3/4-inch fitting size and...

The 14 Inch Manway (PE) Threaded, Non-vented is a Snyder Industries polypropylene lid assembly - a black, threaded closure sized for a 14-inch threaded manway. It measures 15.4 x 15.4 inches across...

The Snyder Industries 3/4 inch socket-by-thread fitting (SKU SII-34700751) pairs a CORZAN CPVC body with a VITON gasket — the materials pairing Snyder supplies for its own tanks. The connection is...