Diameter is what you are buying in the 200PE. At 36 x 48 inches, this 200 gallon open top cylinder keeps the same height as Ronco's mid-size cylinders and spends its extra volume on a wider mouth - and in open-top work, the mouth is the tool. Bigger parts go in flat, baskets and racks lower without threading a needle, and a mixer head has room to work. If your process keeps bumping the rim of a narrower tank, this is the cure.
The tank is molded polyethylene, 70 pounds empty, from Ronco's Tustin, California plant - the same PE process-tank line the company has run since 1974. The resin family covers the usual open-tank duty roster: rinse water, cleaning solutions, plating and treatment chemistry, bulk soak jobs.
Fittings turn it from a vessel into a system. Ronco installs them per order - spin-welded or threaded, at your marked locations - so a bottom drain, side outlet, or overflow lands exactly where your floor plan and piping need it. Print the technical drawing below, mark your ports, and verify with the fitting planner on this page before ordering. A matching molded cover is available to close that wide mouth between uses, which is exactly when a wide mouth becomes a liability.
Every cylinder size and the rest of the catalog are at the Ronco Plastics hub; freight to your ZIP is a minute's work at the freight estimator. OneSource Plastics is an authorized Ronco Plastics dealer.
