Start with the number that matters: 1,835 lb. That is what 220 gallons of water weighs, and it is the payload your truck or trailer signs up for every time you fill the AD9403. Ronco Plastics' largest tank in this slice of the auto-detail line packs that volume into 48 x 30.5 x 37 inches - a footprint that still fits crosswise in a full-size bed - on a 121 lb molding.
The math cuts both ways: a big tank means fewer refill trips across a day of fleet washing, but only if the axle ratings are there. Run the load numbers before you buy, and if they come up short, the 200-gallon heavy-duty AD9404 at 48 x 30 x 38 inches trades a little volume for a thicker wall. Going the other direction, the 330-gallon AD9402 at 50 x 43 x 38.5 inches is the line's true maximum.
This is utility water for washing - no potable claim. Like every Ronco tank rotomolded in Tustin, California since 1974, the AD9403 ships with fittings installed to your order, spin-weld or threaded; print the drawing below and mark your fitting locations so the bulkhead lands over your pump. A tank this size usually ships LTL, so price the lane first with the freight cost estimator, and see the rest of the family under Ronco Plastics tanks.
OneSource Plastics is an authorized Ronco Plastics dealer.
Technical drawing: download the Ronco Plastics AD9403 dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.
Freight
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
