Ninety-five gallons is an in-between number, and that is precisely the RVB354's job. Builds that outgrow the common mid-size fresh tanks usually jump straight to a footprint the bay cannot swallow; this 95 gallon B-series molding is the step in between, sized for larger travel trailers, toy haulers, and mobile service rigs that need real capacity without a full re-design of the compartment. The technical drawing below shows the exact envelope - check it against your bay before anything else.
Construction is Ronco's light-duty potable spec: translucent natural polyethylene, FDA-compliant resin, 118 pounds as molded. The see-through wall is the cheapest water gauge you will ever own, and natural PE has a long record in drinking water service. Ronco has been molding these in Tustin, California since 1974 - this is a mature part, not a new experiment.
The tank ships with fittings installed per your order, spin-welded or threaded at the positions you call out. Print the drawing, mark fill, vent, outlet, and level-sender positions if you run one, then confirm the layout in the fitting planner on this page. Ordering this way means installation day is plumbing, not improvisation. And budget for the load: at 8.34 pounds per gallon, full is a very different number than empty.
See the whole RV water tank family for smaller stock sizes, or the Ronco Plastics hub for every shape the Tustin plant molds. OneSource Plastics is an authorized Ronco Plastics dealer.