8000 Gallon 15 Degree Plastic Cone Bottom Tank with Stand

The Enduraplas 8000 Gallon 15 Degree Plastic Cone Bottom Tank with Stand (SKU THC08000K-WH) is a white, large-format cone bottom built for full-drain batch work — processes where you need the entire volume to empty through the bottom without manual scooping or a residual heel left in the tank. At 8000 gallons of nominal capacity, standing 158 inches tall on a 144 x 144 inch footprint, this is the cone bottom stand tank specified for mixing, blending, and metered dispensing where a flat-bottom tank would strand product. The 15-degree cone drains steadily while keeping the integrated stand height manageable for the volume.

Will it work for your process?

Start with the geometry, because a cone bottom on a stand is a footprint-and-clearance decision as much as a capacity one. This tank measures 144 inches wide by 144 inches long and stands 158 inches tall — verify your ceiling height, door path, and pad dimensions before ordering, and confirm the stand base pattern against your anchor layout. The 15-degree cone is a moderate drain angle: it clears free-flowing liquids well, but if you are running a slurry or a settling solid, review the technical drawing on this page and confirm the angle suits your material's angle of repose. The tank drains through a bottom outlet at the cone tip; confirm the outlet size and fitting configuration with us before you plumb it. Use the Tank Sizing Calculator and the Tank Sizing Guide to match this cone bottom stand tank to your throughput and batch schedule.

Weight and specific gravity — the mistake to avoid

Filled with water, this tank carries 66,720 pounds. That number sets your pad engineering, your stand anchoring, and your rigging plan — a fully loaded 8000 gallon cone bottom is a structural load, not a drop-and-go install. The critical check before any non-water service: this listing does not carry a published specific gravity rating, so confirm the tank's SG rating with us at 866-418-1777 before you commit it to a chemical or heavy-liquid application. Cone bottom stand tanks are rated to a specific gravity ceiling; running a product denser than that rating overstresses the cone and the stand legs. Confirm your fluid's specific gravity against the tank rating, and verify the resin is right for your chemistry using the Chemical Compatibility Database. If you are new to sizing a cone bottom on a poly stand, our buyer's guides for the 550 gallon 20 degree and 300 gallon 30 degree cone bottom stand tanks walk through the same decisions at smaller scale.

Freight

This cone bottom stand tank ships LTL freight and, at 158 inches tall and 66,720 pounds loaded, moves as an oversized load — plan for a delivery point with the equipment and space to receive it off the truck. Freight is quoted live to your ZIP code, separate from the list price; get your number in seconds with the Freight Cost Estimator, or call 866-418-1777 to confirm outlet fitting, specific gravity rating, and delivery logistics for the 8000 gallon 15 degree cone bottom tank before you order.