Ronco Marine Water Tanks

The B366 rounds out the B-series small-tank bench with 18 gallons in a 22 x 17 x 12 inch molding - compact in plan, moderate in height, the proportions of a tank that was designed to fit real lockers...

The B144 is a 13 gallon marine molding that Ronco builds as a dual-role blank. Order it with fresh-water fittings and it becomes a potable supply tank in FDA-compliant polyethylene; order it as a...

Small boats punish their gear hardest - more motion, more slamming, less structure to hide behind - which is why the B476 exists: 13 gallons in a 25 lb marine molding, a deliberately overbuilt shell...

The BOAT20W carries 19 gallons at 38 x 15.5 x 8.12 inches - a long, low molding just over 8 inches tall, and the heaviest-built tank of its size in Ronco's marine range at a 62 lb blank. That weight...

A 12 x 12 inch square section running 32 inches long: the BOAT27W is 19 gallons shaped like a beam, and it slides into the chases, quarter-berth margins, and engine-room corners where a conventional...

Thirteen inches wide and 35 long, the BOAT39W is a 21-gallon molding drawn for the slot alongside an engine, the outboard face of a quarter berth, or the narrow run under a side deck. It is the...

The BOAT57W is a 20-gallon block in the most conventional proportions on this page - 32 x 16.5 x 10 inches, roughly two-to-one in plan and low enough to disappear under a berth or bench. When a...

At 7.75 inches tall, the BOAT72W is the shallowest tank in this run of Ronco's heavy-duty marine line - 20 gallons pressed into a 35 x 19 inch panel that fits where even the 8-inch planks will not...

Nineteen gallons in 27 x 15.25 x 12 inches: the B549 sits in the gap between the small day-boat tanks and the serious cruising sizes, which makes it the natural upgrade when a boat's original tank...

Replacing a failed metal or fiberglass water tank is where the Ronco Plastics B481 earns its keep. At 30 gallons, in a seamless rotomolded polyethylene shell, it drops into refit projects with none...

Refits are where the Ronco Plastics B149 earns its keep. When a 30-year-old aluminum water tank finally pinholes, the replacement has to thread through an existing hatch and land in a compartment...

The Ronco Plastics B151 is a 21 gallon marine fresh water tank with a shape of its own in the Ronco catalog - one more answer to the eternal refit question of which molding matches the compartment...