The AD9401 is the tank you lift into place Monday and out again Friday: a 90-gallon flat-bottom utility molding in white, 38.5 x 26.5 x 25 inches, built to sit on a truck bed, trailer deck, or shop floor without a cradle. The flat bottom is the feature - no saddle, no stand, no hardware between the tank and whatever it rides on. At 55 lb empty, two people move it easily.
Ninety gallons of water weighs about 751 lb, and that number is your anchoring spec: a flat bottom keeps the tank stable at rest, but in a moving vehicle it must be strapped, and the deck under it must be rated for the load. Mobile detailing, pressure washing, plant watering, and general liquid hauling are the natural duties.
Ronco rotomolds it in Tustin, California - the same shop, the same process, since 1974 - and installs fittings per order: spin-weld or threaded, at the marks you give them. Print the drawing below and mark where the outlet and fill should land, or drop them on the on-page fitting planner. Because a 90-gallon blank is bulky, run your ZIP through the freight cost estimator before you plan the delivery week, and see the rest of the line on the Ronco Plastics hub. OneSource Plastics is an authorized Ronco Plastics dealer.
Technical drawing: download the Ronco Plastics AD9401 dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.
