Before you order the AD9406, open your truck's door jamb and read the payload sticker. This 180-gallon pickup tank holds about 1,501 lb of water when full - a load that half-ton trucks cannot legally carry with anything else in the bed. That is not a criticism of the tank; it is the reason it exists. Water hauling at this scale is a payload problem first and a tank problem second, and the AD9406 solves the tank half properly.
The molding is 53 x 36 x 26 inches - sized across a full-size bed - with a 99 lb empty weight that reflects a wall thick enough for repeated loaded miles over washboard roads. Ranch water runs, dust suppression, equipment washdown, and remote-site supply are its home turf.
It ships from Ronco's Tustin, California plant, where they have rotomolded since 1974, with fittings installed per order: spin-weld or threaded, positioned to your pump and drain plan. Print the drawing below and mark the locations, or click them onto the on-page fitting planner. A tank this size ships freight, so price your lane with the freight cost estimator up front - and the full Ronco range is on the Ronco Plastics hub. OneSource Plastics is an authorized Ronco Plastics dealer.
Technical drawing: download the Ronco Plastics AD9406 dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.
