Thirty-two gallons sits in the gap between weekend tankage and cruising tankage, and boats that live in that gap are exactly who the B223 was drawn for. It is a marine fresh water molding with enough supply to stretch a long weekend into most of a week - about 267 lb of water when full, at 8.34 lb per gallon - without swallowing a locker whole the way the 45 gallon class does.
The construction does not change with the size: one-piece rotomolded FDA-compliant polyethylene, rated for potable water, seamless from fill to sump. It ships at 101 lb as a blank shell, and the blankness is deliberate. Ronco installs every fitting per order - spin-welded or threaded - at the locations you mark. Print the drawing below and set your fill under the deck plate, your vent on a rising run, your pickup at the corner that is lowest once the boat sits on her trim; or place all of it on the on-page fitting planner and skip the printer.
Give the filled weight honest structure - bearers under the footprint, straps into stringers - and leave a hand's reach to the fittings for the service days ahead. That is the install discipline Ronco has taught from Tustin, California since 1974, and it is why these tanks turn up intact in decades-old refit photos.
Bracket the capacity in the boat tank category, or survey every shape on the Ronco Plastics hub. OneSource Plastics is an authorized Ronco Plastics dealer.
Technical drawing: download the Ronco Plastics B223 dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.
