The B262 is 13 gallons in a 15.88 x 15.12 x 14.5 inch near-cube - a marine tank sized like a milk crate, which is exactly what makes it useful. It drops into the odd cubic voids every hull has: under a V-berth step, beside a livewell, in the corner of a console, anywhere a foot-and-a-bit of space is going unused.
Thirteen gallons covers a day boat's fresh water or a compact head's holding, and as a B-series dual-role molding the B262 does either. Fresh-fitted, the food-grade polyethylene carries potable supply; waste-fitted, it holds gray or black water. It ships blank - print the drawing below, mark your fitting locations, and the on-page fitting planner specs the spin-weld or threaded fittings Ronco installs to your marks.
Sixteen pounds empty, about 108 lb full: one hand in, one strap down, but do use the strap. Molded in Tustin, California, where Ronco has rotomolded since 1974. Scan the neighboring small tanks in our boat tank category or the complete line on the Ronco Plastics hub. OneSource Plastics is an authorized Ronco Plastics dealer.
Technical drawing: download the Ronco Plastics B262 dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.
