Under ten inches tall, the B264 carries 15 gallons in a 22 x 17 x 9.88 inch low-profile molding - the shape for under-seat and under-berth spaces where height is the scarce dimension. It spreads its capacity flat, keeping the mass low and leaving the space above for a cushion, a drawer, or a hatch.
The B-series dual-role design means those 15 gallons take either assignment. Fresh-fitted, the food-grade polyethylene molding is potable supply for a weekender or camper; waste-fitted, it is a shallow gray or black holding tank that fits where taller waste tanks cannot. It ships bare: print the drawing below, mark your fitting locations on the broad top, and use the on-page fitting planner to spec the spin-weld or threaded fittings Ronco installs to your marks.
Eighteen pounds empty and about 125 lb full - a solo install that still deserves a supported base and a strap. Molded in Tustin, California, as Ronco has done since 1974. Low-profile neighbors live in our boat tank category and RV holding tanks; the full range is on the Ronco Plastics hub. OneSource Plastics is an authorized Ronco Plastics dealer.
Technical drawing: download the Ronco Plastics B264 dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.
