The B278 closes out the small end of Ronco's marine water line: a 10 gallon molding shipped bare, no fittings, ready to become exactly the tank your boat's plumbing calls for. Ten gallons is the honest day-boat number - drinks, dishes, and a rinse for the crew - carried in a blank that weighs just 15 lb on arrival.
The bare molding is the feature. Print the drawing below to see the true shape, mark your fill, vent, and pickup where the hoses actually run, and use the on-page fitting planner to spec spin-weld or threaded fittings; Ronco installs each one to your marks before shipping. Fresh-fitted, the natural food-grade polyethylene is right for potable service, and the B-series dual-role design means the same blank can be ordered fitted for gray water holding instead.
Full, it carries about 83 lb - modest, but still worth a flat bed and a strap in anything that moves. Molded in Tustin, California, where Ronco has built every tank since 1974. Compare the small marine range in our boat tank category, or see the maker complete on the Ronco Plastics hub. OneSource Plastics is an authorized Ronco Plastics dealer.
Technical drawing: download the Ronco Plastics B278 dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.
