The Ronco Plastics B307 carries 64 gallons of fresh water in a substantial marine molding - 101 lb of thick-walled polyethylene shaped to run low against a hull. It is the tank for a cruiser committing to real time away from the dock: full, it holds about 534 lb of water, a supply measured in weeks rather than weekends. Mount it low and centered, on structure sized for the load.
Ronco ships it as a sealed blank because the fittings are built per order: spin-welded or threaded, each at a location you mark. A tank this size typically wants a pump pickup at the low end, a deck fill at the accessible end, and a vent looped high between - a layout only you can draw for your boat. Print the drawing below, draw it, and verify with the on-page fitting planner before ordering. The FDA-grade polyethylene keeps every gallon potable.
Molded in Tustin, California by Ronco Plastics - at this work since 1974 - the B307 sits shoulder to shoulder with several other 60-odd-gallon formats on our boat tanks shelf; compare footprints before committing. Freight to your ZIP prices instantly in the freight cost estimator. OneSource Plastics is an authorized Ronco Plastics dealer.
Technical drawing: download the Ronco Plastics B307 dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.
