Between the 100-gallon tanks that run out mid-afternoon and the 200-gallon tanks that demand a serious chassis sits the AD9405: 150 gallons, heavy-duty wall, 46 x 30 x 29 inches. For a one-truck detailing operation it is often the honest answer - enough water for a full day's route at about 1,251 lb when brimmed, on a chassis-friendly 83 lb shell.
The heavy-duty spec means the wall is molded thick for daily fill-and-drain work, the kind of duty that fatigues lighter tanks at the corners. It is utility water only - wash, rinse, pressure-washer supply - with no potable claim. The 29-inch height also matters: it stays below many bed-rail toolbox lines where the taller 200-class tanks will not.
Flanking it in the line: the 200-gallon heavy-duty AD9404 at 48 x 30 x 38 inches above, and the 100-gallon AD9401HD at 38.5 x 26.5 x 25 inches below, with the 60-gallon AD9407 for the lightest rigs. Ronco Plastics rotomolds them all in Tustin, California - since 1974 - and installs fittings per order, spin-weld or threaded. Print the drawing below, mark your fitting locations, and price the lane with the freight cost estimator.
OneSource Plastics is an authorized Ronco Plastics dealer.
Technical drawing: download the Ronco Plastics AD9405 dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.
Freight
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
