The RPV125 is the middle build of Ronco's vertical line: 125 gallons at 31 inches across and 47 inches tall. That under-four-foot height is its quiet advantage - the tank tucks below benches, windows, and low pipe runs where the taller columns cannot go, and you can see into an open port without a step stool. Capacity without headroom is the brief this molding answers.
Full, it holds about 1042 lb of water on its 31 inch circle, so the floor underneath should be slab or engineered framing, never enthusiasm. The blank ships at 110 lb.
Every penetration goes on per order at the Tustin, California plant - spin-welded or threaded where you mark it, Ronco's standing practice since 1974. Outlet height on a vertical fixes your usable volume, so print the drawing below, decide how low the drawdown must reach, and finalize positions in the on-page fitting planner.
Price the LTL lane with the freight cost estimator; the full vertical family is on the Ronco Plastics hub. OneSource Plastics is an authorized Ronco Plastics dealer.
