The RPV50 inverts the vertical formula: at 31.62 inches across and only 24.75 inches tall, it is wider than it is high - a squat 50 gallon drum of a tank that slides under workbenches, counters, and low shelving where every other member of the vertical line is too tall to follow. If your available space is measured under something, this is the molding for it.
Fifty gallons of water weighs about 417 lb, low-slung and stable on the wide footprint; no restraint gymnastics required, just flat floor. The blank ships at 40 lb, light enough for one person to place.
Like every Ronco tank since 1974, it takes its fittings per order at the Tustin, California plant - spin-welded or threaded where you mark them. On a tank this short, the top surface is prime real estate for fill and vent while the last inches of drawdown depend on outlet placement, so print the drawing below, plan both ends, and finalize in the on-page fitting planner.
Check shipping with the freight cost estimator, and see the taller RPV columns on the Ronco Plastics hub. OneSource Plastics is an authorized Ronco Plastics dealer.
