Ronco RV Water Tanks

The 66W is the long-range flagship: 93 gallons in a 67 x 22 x 16 inch molding - five and a half feet of tank built for the full length of a bus bay or a big fifth-wheel's basement. Capacities like...

The RV66W is what a big fresh water tank looks like when it is designed for a coach instead of a warehouse: 67 inches long, 22 wide, only 16 tall. Ninety-five gallons, the largest capacity in Ronco's...

Forty-three gallons is boondocking range. It is dishes, showers, coffee, and dog bowls for a long weekend without a hookup, and the RV12W is the light-duty Ronco W-series molding that carries it...

The RV19W is Ronco's 19W L.D. molding: 43 gallons of fresh water capacity in the light-duty potable spec - natural FDA-compliant polyethylene, translucent wall, no dyes and no waste-side resin...

Mold number 4W is one of the low numbers in Ronco Plastics' fresh-water book, and low numbers mean longevity: this 60-gallon shape has been earning its keep since the era when Ronco - rotomolding in...

Ninety gallons in a slab: the RV64W measures 39.25 x 39.25 inches square and only 14.5 inches tall, which is how Ronco Plastics gets big-rig water capacity under a floor instead of inside a closet...

The 24W is a long-hauler's tank: 43 inches of length, 16 wide, 10.5 tall, 27 gallons. That aspect ratio is built for the underfloor run alongside a driveshaft, the full length of a pickup bed...

Eight inches tall, 50 inches long. The 50W is the first of Ronco's plank series - three moldings sharing the same 16 inch width and 8 inch height, growing only in length. This one holds 23 gallons,...

The B133 is a pancake: 57 x 26.5 x 9.25 inches, under ten inches tall, spreading 53 gallons across nearly five feet of floor. Tanks this flat are how big capacity hides under a berth or an RV floor...

The Ronco Plastics B156 is 50 gallons in a 40 x 20 x 16 inch block, and it is deliberately two tanks in one tooling. As part of Ronco's marine water / waste series, the molding is finished to...

Seven inches tall, 48 gallons. The B229 is the extreme end of the low-profile art: a 68.5 x 27 x 7 inch panel of a tank that lies flat where no conventional tank fits at all - under cockpit soles,...

Fifty-two gallons in a 28" x 23" x 21" block, and the choice of what runs through it left entirely to you: the Ronco Plastics B295 is a dual-purpose marine and RV molding that Ronco finishes either...