Mold number 4W is one of the low numbers in Ronco Plastics' fresh-water book, and low numbers mean longevity: this 60-gallon shape has been earning its keep since the era when Ronco - rotomolding in Tustin, California since 1974 - was first proving that one-piece polyethylene belonged under RVs. The RV4W is also the most substantial of the 60-gallon molds at 84 lb of shell.
The spec has never needed changing: light-duty FDA-compliant natural polyethylene, translucent so the level shows through, no seams anywhere. Sixty gallons full means about 500 lb of water riding on your frame, so cradle and strap it like the structural load it is.
Its exact geometry is on the drawing below - print the drawing below, check it against your bay, and mark your fitting locations, because every RV4W gets spin-weld or threaded fittings installed to the customer's marks before it ships. If this veteran shape is not your shape, the 60-gallon RV25W and the 60-gallon RV54W at 36 x 30 x 14.25 inches hold the same water differently. Full range: RV water tanks; shipping: freight cost estimator.
OneSource Plastics is an authorized Ronco Plastics dealer.
Technical drawing: download the Ronco Plastics RV4W dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.
Freight
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
