Skip to main content

Enduraplas

1010 Gallon Plastic Horizontal Sump Bottom Skid Mounted Storage Tank with Skid

$4,598.14
0
(No reviews yet) Write a Review
Adding to cart… The item has been added
SKU:
THD01010K-BLK
Weight:
606.00 LBS
Width:
49.00 (in)
Height:
59.00 (in)
Depth:
130.00 (in)

The Enduraplas 1010 Gallon Horizontal Sump Bottom Skid-Mounted Storage Tank is a horizontal leg tank built for bulk water hauling and stationary storage where the load has to sit low and stay put. Because it rides on an integrated skid, this 1010-gallon tank is ready to bolt to a trailer, truck bed, or pad without fabricating a separate cradle. The horizontal cylinder-on-side geometry and the sump bottom mean the tank drains toward the low point, so you recover more of the water you carry.

Will it work for your setup?

Verified dimensions are 130 in long by 49 in wide by 59 in tall, giving a 49.0 x 130.0 in footprint. Confirm that length and width against your trailer deck or skid platform before you order, because a horizontal leg tank lives or dies by its footprint. See the technical drawing on this page for the leg spacing, sump position, and outlet and fitting sizes. Filled to its full 1010-gallon rating with water, this tank weighs roughly 8,423 lb, so the deck, frame, or pad under it has to be rated for that static load plus any dynamic load if it travels loaded. Run the numbers with our Tank Sizing Calculator, and if you are still deciding between capacities and shapes, the Tank Sizing Guide walks through the tradeoffs on horizontal leg water tanks and skid-mounted storage.

The mistake to avoid

The most common error on a skid-mounted horizontal tank is underbuilding the surface it sits on. At more than 8,400 lb full, this is not a tank you set on bare gravel or an undersized trailer frame. That 8,423 lb assumes water at SG 1.0; this tank carries no published specific-gravity rating above water, so do not fill it with heavier liquids without confirming the rating with us at 866-418-1777. For a stationary install, pour a proper pad; our guide on concrete pad sizing for above-ground polyethylene tanks covers the ACI framework for getting the base right. If this tank is feeding a transfer or loadout operation, the loadout pad engineering guide covers slope and containment geometry. Buyers shopping this size often search for a plastic horizontal sump bottom tank, a skid-mounted water storage tank, or a 1010-gallon leg tank; this is that tank, ready to mount.

This 1010-gallon Enduraplas tank ships LTL freight, quoted live to your ZIP. Get a real number in seconds with our Freight Cost Estimator, or call 866-418-1777 and we will size the tank, the pad, and the freight to your site together.

Adding to cart… The item has been added