3000 Gallon Cone Bottom Tank and Poly Stand in Black

The Enduraplas 3000 Gallon Cone Bottom Tank on a poly stand in black is built for full-drain batching, dosing, and metering, where you want every gallon to gravity-feed out the cone apex instead of pooling on a flat floor. This unit pairs the cone-bottom tank with a molded polyethylene stand, giving you an integrated storage-and-dispense setup that stands 134 inches tall on a 96 x 96 inch footprint. Below is what you need to confirm this tank works for your process, how it ships, and the one mistake to avoid before you buy.

Does it work for your application?

Capacity is 3000 gallons in a cone-bottom geometry, measuring 134 inches in overall height with a 96 x 96 inch footprint (dimensions verified from launch specs). The cone bottom and poly stand are engineered as a matched pair, so the tank drains completely and the stand carries the load without a separate steel frame. Filled with water at 3000 gallons, the system carries roughly 25,020 pounds. That figure is the filled operating weight your pad, anchoring, and floor loading must be rated to hold, not the shipping weight, which is the empty tank plus stand. Chemicals heavier than water raise that operating load in direct proportion to specific gravity, so run the numbers with the Tank Sizing Calculator and Tank Sizing Guide to confirm the 3000-gallon size and the cone footprint fit your space and your slab before you commit.

The stand decision is the mistake to avoid

Choosing between a polyethylene stand and a steel frame is the single most consequential decision on a cone-bottom tank, and it is easy to get wrong. This SKU comes with the poly stand, which is the right call for many chemical and water applications, but load, height, and agitation needs can push a larger unit toward steel. Walk the tradeoff before you order using our stand selection decision tree and the stand compatibility matrix for Norwesco, Snyder, and Enduraplas. If you are new to the format, the buyer's guides for the 300-gallon and 310-gallon versions cover the same stand-selection fundamentals, though pad loading and anchoring scale with capacity, so treat the numbers on this 3000-gallon unit on their own terms.

Confirm the resin rating before chemical service

A cone-bottom tank on a poly stand is a proven choice for chemical storage and metering. Before you store anything heavier than water, match the tank's specific-gravity rating and resin to your chemical's specific gravity, concentration, and temperature. Check your chemical against our Chemical Compatibility Database, then call us at 866-418-1777 so we confirm the resin and specific-gravity rating for your exact service and specify the bottom-outlet fitting and gasket material to suit it.

This tank and stand ship LTL freight, quoted live to your ZIP code. Get a landed freight number with the Freight Cost Estimator, or call 866-418-1777 and we will size the tank, confirm the resin rating for your chemical, and quote freight to your dock.