The Bushman 3200 Gallon Vertical Water Storage Tank (SKU TC3200IW-GREEN) is a bulk plastic reservoir molded in green for above-ground non-potable water service — rainwater capture, fire reserve, irrigation supply, well buffering, and reuse-train storage. It stands 112 inches tall on a 95 x 95 inch footprint, giving you 3,200 gallons in a single vertical column that fits a compact pad. Verified launch dimensions are on this page so you can confirm the fit against your site before you order.
Specs at a glance
- Capacity: 3,200 gallons
- Height: 112 in
- Footprint: 95 x 95 in
- Full water weight: 26,688 lb (filled service load)
- Dimensions: verified (launch)
Will it work for your site?
The critical planning number is water weight. Filled to 3,200 gallons, this tank carries roughly 26,688 pounds — over 13 tons resting on that 95 x 95 inch base. That load dictates everything underneath it: your pad has to be flat, level, and continuously supported edge to edge, because plastic tanks transfer their entire load to the surface they sit on. If you are pouring new, our concrete pad sizing guide (ACI 360R-10 framework) walks the slab design, and the hydrostatic test methodology guide covers the water-fill acceptance and settlement monitoring to run before the tank goes into service. Not sure 3,200 gallons is the right band? Run the Tank Sizing Calculator or read the Tank Sizing Guide to match capacity to your draw and refill cycle.
Fire reserve and reuse applications
A 3,200-gallon vertical footprint is a common size for rural fire-water reservoirs and quality-banded reuse storage. For private fire protection planning, our NFPA 22 reservoir design guide covers sizing discipline and freeze protection for cold-climate service, and if you are aggregating grey water, rainwater, or HVAC condensate, the industrial water reuse topology guide shows how a vertical storage tank like this one fits a treatment-staged storage train.
The mistake to avoid
This is a water storage tank, sized for the weight of water (specific gravity 1.0). Do not put a liquid heavier than water into it without confirming a specific-gravity rating first — heavier solutions can overstress a shell that was never sized for them. If you are storing something denser than water, call us at 866-418-1777 and we will point you to an SG-rated tank instead. Keep this one on water and matched-service duty, and lock in your fitting layout at order — call to spec your outlet, bulkhead, and gasket configuration against your plumbing.
This tank ships LTL freight and is quoted live to your delivery ZIP. It ships empty, so the 26,688 lb figure is filled service weight for pad design, not freight weight. Get your number instantly with the Freight Cost Estimator, or call 866-418-1777 and we will walk the freight, pad prep, and fitting layout with you. Listed before freight.
