The Enduraplas THV02500 is a 2,500-gallon vertical liquid storage tank built for bulk water on farms, rural fire-protection reservoirs, and industrial process supply. It stands 113 inches tall on a 90-by-90-inch footprint, so before you commit a pad or a doorway, confirm you have the vertical clearance to fill and vent it and a level base wide enough for the full 90-inch diameter. Dimensions on this listing are launch-verified against the technical drawing you see on this page.
Will it hold what you need?
At rated capacity this tank carries roughly 20,850 pounds of water when full. That number is the one that governs your project, not the empty shipping weight. A cylindrical poly tank concentrates its entire load on the base ring, so it needs a continuous, level, fully supporting foundation - a reinforced concrete pad or an engineered compacted base, never blocking or partial support. The 90-inch footprint tells you how much flat, load-rated surface to prepare. If you are still choosing between capacities, run your daily draw and refill numbers through the Tank Sizing Calculator and the Tank Sizing Guide before you buy - stepping up or down a vertical storage tank size is far cheaper on paper than after freight.
The mistake to avoid
This is a vertical water storage tank. If you plan to store a liquid heavier than water - many fertilizers, brines, and chemical concentrates carry a specific gravity above 1.0 - the specific-gravity rating is not published on this listing, so call 866-418-1777 and let us confirm a rated unit before you order. A tank sized for water can be over-stressed by a denser fluid even when it is not filled to the top, so do not buy this water-class tank blind for heavy-liquid service. The same discipline applies to fire-water reservoirs: our fire-water reservoir design guide walks through NFPA 22 sizing and cold-climate freeze protection for a 2,500-gallon-class tank.
Freight and next steps
A 2,500-gallon vertical tank ships as an oversized LTL freight item and is quoted live to your delivery ZIP - never bundled into the list price. Get a real number in seconds with the Freight Cost Estimator. Fitting configuration - inlet, outlet, vent, and the gasket on any bulkhead outlet - is confirmed at order rather than shown on this listing; because a full column puts roughly 20,850 pounds of static head on the lower wall, any bulkhead outlet needs a properly torqued gasket rated for that pressure, so call and we will spec the fitting layout with you. Questions on lead time, fitting configuration, or matching this tank to your fluid? Call 866-418-1777 and we will spec it with you.
