Skip to main content

Snyder Industries

2500 Gallon Plastic Vertical Liquid Storage Tank in Black

$5,498.99
0
(No reviews yet) Write a Review
Adding to cart… The item has been added
SKU:
SII-5090000N51
Availability:
Built to order; freight quoted per ZIP
Weight:
560.00 LBS
Capacity:
2500 GALLONS
Color:
Black
Material:
Polyethylene
Specific Gravity:
1.9
Diameter:
90"
Manufacturer Part #:
5090000N51
Lid/Manway:
18" Threaded Vented Manway
Technical Drawing:
https://onesourceplastics.com/content/snyder-technical-drawings/snyder-2500-gallon-black-heavy-duty-vertical-storage-tank-5090000c34.pdf
Ship Weight:
560 lb
Ship Dimensions:
107" L x 90" W x 90" H (crated)
Specific Gravity Rating:
1.9 (Max 15.87 lbs/gal)
Outlet:
2"
Lid Size:
18"
Certifications:
FDA Approved

The Snyder Industries 2500 Gallon Vertical Liquid Storage Tank in black is a polyethylene vertical storage tank built for bulk liquid on a compact 90 x 90 inch footprint. It stands 107 inches tall, so it holds a full 2,500 gallons on roughly a 7.5-foot-square base without spreading across your pad. Carried in the catalog as a black vertical storage tank, it is the workhorse size farmers, contractors, and rural water haulers reach for when they need serious volume in a single upright vessel.

Will it work for your liquid?

This tank carries a 1.9 specific gravity rating, which is unusually high for a water-class vertical storage tank. That rating is structural headroom: the shell is molded to carry dense contents, giving you a safety margin rather than a wall built only for the weight of water. Filled with water at 2,500 gallons, the contents weigh about 20,850 pounds; at the maximum rated 1.9 specific gravity the shell is engineered to hold up to roughly 39,615 pounds of contents. Use those numbers when you plan the base, and confirm your liquid's specific gravity stays at or below 1.9 before you fill. Fittings and outlets are configured at order, so confirm your plumbing needs when you place the order rather than assuming a fixed port layout.

Sizing the pad and the delivery path

A tank this size needs a level, full-diameter concrete or compacted base that supports the entire 90 x 90 inch footprint, because the load concentrates as the vessel fills. At about 8.9 feet tall, check your overhead and doorway clearances before delivery day so the tank clears any structure it has to pass through or sit under. Size the pad for the full contents weight, not the empty tank.

Freight: how it ships

At over 100 inches tall this is an LTL freight item, not a parcel shipment. Snyder molds this line at Lincoln, Nebraska and Philippi, West Virginia, so we ship from whichever of those two plants sits nearer to you, with LTL freight quoted live to your ZIP. Get a real number in minutes with the Freight Cost Estimator, or call 866-418-1777 and we will work the quote with you.

The mistake to avoid

The most common error on a tank this large is underbuilding the base or assuming the black color changes what you can store. Black polyethylene resists UV well and slows algae growth versus a translucent tank, but the shell rating, not the color, governs the load. Match the 1.9 specific gravity ceiling to your actual liquid and size the pad for the full contents weight.

Not sure this is the right capacity? Run your numbers through the Tank Sizing Calculator and the Tank Sizing Guide. If you are weighing dimensions, note this black unit's 90 x 90 x 107 inch profile differs from the natural white 2500-gallon options; compare geometry directly against the natural white 96 x 96 buyer's guide. For high-volume backup supply, the fire-water reservoir design guide covers cold-climate freeze protection. Questions on the black 2500 gallon Snyder tank? Call 866-418-1777 for a live freight quote to your ZIP.

Freight and documents

Ships from: Lincoln, NE; Philippi, WV. LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.

Technical drawing (PDF) for Snyder Industries SII-5090000N51.

See this tank

Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).

Ready to order?

Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.

Adding to cart… The item has been added