Fourteen inches wide. That is the AD9409LD's defining dimension: a 50 gallon transport tank molded 40 x 14 x 24 inches, the slimmest profile in Ronco's AD family. It is built for the space every mobile rig has and few tanks fit - the gap along a bed rail, behind a toolbox, down the wall of an enclosed trailer. Where the standard boxy tanks in the family claim a full corner of the deck, this one takes a strip.
It is a light-duty molding at 70 pounds, polyethylene like its siblings, sized for supported transport service - deck-mounted, strapped, riding flat. Fifty gallons is a working day of wash or rinse water for a mobile detailing or service rig; at 8.34 pounds per gallon, remember the full tank is a real load and secure it like one. Ronco molds the AD family in Tustin, California, where it has produced transport and process tanks since 1974.
Fittings are installed per order - spin-welded or threaded at your marks - so the outlet can land exactly where your pump or hose reel wants it. Print the technical drawing below, mark the ports, and lock the layout with the fitting planner on this page before ordering.
If the bay is wider than it is long, the family has your shape too: the AD9407 at 60 gallons runs low and flat, the AD9401LD doubles the volume at 100 gallons, and the AD9405 carries 150 gallons in heavy-duty wall. The full family is at the Ronco Plastics hub. OneSource Plastics is an authorized Ronco Plastics dealer.
