The Enduraplas 2020 Gallon Plastic Vertical Liquid Storage Tank (SKU THV02020) is a vertical polyethylene bulk-water tank built for above-ground stationary storage. It holds a nominal 2,020 gallons on a 110 by 110 inch footprint. If you are sizing a fire-water reservoir, an irrigation buffer, or a process-water reserve, this is a mid-large vertical for a square pad. Confirm the working volume you actually need with the Tank Sizing Calculator and the Tank Sizing Guide before you commit, and check the technical drawing on this page for exact height, diameter, and fitting placement.
Will it work for your site
Filled with water, this tank carries roughly 16,847 pounds at full capacity, so the pad has to be engineered for that dead load. A full-contact, level foundation is not optional under a tank this size. Our guide on concrete pad sizing for above-ground polyethylene tanks walks through the ACI 360R-10 framework and where the ACI 318 boundary starts. The tank comes with a 3 inch bolted fitting for outlet or drain plumbing and a 16 inch lid for access, gauging, and fill. Confirm the layout against the technical drawing on this page before you plan your plumbing runs.
Freight
This is an oversized vertical tank that ships LTL freight on its own, not by parcel. The ~16,847 lb filled weight drives the pad design; the empty ship weight is what actually moves, and it sets the freight class. Freight is quoted separately per destination and is never included in the list price. Get a live rate to your ZIP with our Freight Cost Estimator, or call 866-418-1777 for a hand quote and delivery details such as liftgate or limited-access sites.
The mistake to avoid
This vertical is configured for water and water-like liquids, and its specific-gravity rating is not published in this listing. Before you store anything heavier than water or any chemical, confirm the resin and SG rating with us at 866-418-1777 — do not assume a water tank is rated for a denser fluid. Compatibility also depends on the hardware, not just the tank wall: verify the gasket material for the 3 inch bolted fitting and the 16 inch lid seal (EPDM versus Viton) when you call. For fire-protection service, read our fire-water reservoir design guide for NFPA 22 sizing and freeze protection.
Ready to move on this 2020 gallon Enduraplas vertical? Pull a freight number with the Freight Cost Estimator or call 866-418-1777, and use the Tank Sizing Calculator if you are still confirming volume.
