Chem-Tainer Tank Stands

This stand is built for the Chem-Tainer 75 or 100 gallon inductor tank, holding the cone-bottom vessel upright with clearance below the cone for full drainage. The listed cone angle is 15 degrees...

This Chem-Tainer stand supports the 150 gallon inductor tank, holding its 60-degree cone bottom off the floor so the tank can drain fully from the outlet. The frame is painted steel with a 25 x 25...

The Steel Stand for the 5 Gallon Chem-Tainer Cone Bottom Tank (TC1113CK) is a steel stand built for the matching Chem-Tainer 5 gallon cone bottom tank with its 15° cone. The stand measures 15" L x...

The TC1517CK is a bolt-together steel stand made for the 10 gallon Chem-Tainer cone bottom tank. Because that tank drains through a 15-degree cone rather than sitting on a flat base, it needs a...

This Steel Stand for the 15 Gallon Chem-Tainer Cone Bottom Tank is the matched support frame that lets the tank's 15-degree cone bottom drain from its lowest point. A cone bottom tank cannot sit flat...

The TC1516AK is a steel stand built to raise the 12-gallon Chem-Tainer cylindrical tank up off the floor to a workable height. It stands 50 inches tall on a 24 x 24 inch footprint, lifting the tank...

The Steel Stand for the 15 Gallon Chem-Tainer Cylindrical Tank is a steel frame that raises a flat-bottom cylindrical tank off the ground. It stands 50 inches tall on a 24 x 24 inch footprint, sized...

The Steel Stand for the 16 Gallon Chem-Tainer Cylindrical Tank is a steel frame that elevates a flat-bottom cylindrical tank off the ground to a more workable height for access and drainage. It...

The Steel Stand for the 25 Gallon Chem-Tainer Cylindrical Tank (SKU TC1440AK) is a steel support frame that holds a 25-gallon Chem-Tainer flat-bottom cylindrical tank up off the floor. It stands 50...

The Steel Stand for the 36 Gallon Chem-Tainer Cylindrical Tank is a steel frame that holds one flat-bottom cylindrical tank up off the floor. It stands 50 inches tall on a 24 by 24 inch footprint,...

The Steel Stand for the 40 Gallon Chem-Tainer Cylindrical Tank is a bolt-together steel frame that holds a flat-bottom 40-gallon Chem-Tainer cylindrical tank up off the floor. It stands 50 inches...

The Steel Stand w/ Mixer Mount is a steel frame built to hold a 15 gallon Chem-Tainer cylindrical tank, with an integrated mount for a mixer. It carries a 25 x 25 inch footprint and stands 25 inches...