Chem-Tainer Tank Stands

The Steel Stand w/ Mixer Mount is a steel support frame built to cradle the 165 Gallon Chem-Tainer cylindrical tank. It stands 50 inches tall on a 32 x 32 inch footprint and weighs about 90 pounds,...

The TC3060AM is a steel stand with an integrated mixer mount, sized to support the 180 Gallon Chem-Tainer cylindrical (flat-bottom) tank. It is a support accessory, not a tank. The frame carries a 32...

The Steel Stand for the 275 Gallon Chem-Tainer Cylindrical Tank is a bolt-together steel support frame built to hold Chem-Tainer's 275-gallon flat-bottom cylindrical tank. It is a stand only, not a...

The Steel Stand for the 330 Gallon Chem-Tainer Cylindrical Tank (Chemtainer, SKU TC4548AK) is a welded steel support frame that carries one 330-gallon flat-bottom cylindrical Chem-Tainer tank at...

The Steel Stand for the 360 Gallon Chem-Tainer Cylindrical Tank is a steel support frame built to hold Chem-Tainer's 360-gallon flat-bottom cylindrical tank. It stands 60 inches tall on a 50 x 50...

The Steel Stand for the 550 Gallon Chem-Tainer Cylindrical Tank is a bolt-together steel frame that holds a flat-bottom cylindrical tank up off the ground. It stands 60 inches tall on a 50 x 50 inch...

The Chemtainer Steel Stand for 200 Gallon Cone Bottom Tanks (SKU TC3165CK) is the matched steel support frame for a 200 gallon, 15-degree cone bottom tank. A cone bottom tank cannot stand on its own...

The Steel Stand with Mixer Mount is a steel support frame built for the 550 gallon Chem-Tainer cylindrical flat-bottom tank. It is not a tank and holds nothing itself - it is the elevated base your...

The Chemtainer TC4246CM is a steel stand with an integrated mixer mount, built for a 250 gallon cone bottom tank with a 15-degree cone angle. The frame stands 45" tall on a 45" x 45" footprint and...

This steel stand carries the 250 gallon Chem-Tainer cone bottom tank, giving the tank's 15-degree cone an elevated, supported seat with clearance underneath for full drain-down plumbing. It is the...

The TC4224CK is a steel stand built for the Chem-Tainer 125 gallon cone bottom tank with a 15-degree cone. A cone bottom tank cannot sit flat on the floor, so a matched stand carries the tank in an...

This Chemtainer steel stand with mixer mount supports a 200 gallon cone bottom tank and provides a mounting point for an agitator drive above the tank. The bolt-together steel frame has a 32" x 32"...