Chem-Tainer

This stand is built for the Chem-Tainer 75 or 100 gallon inductor tank, holding the cone-bottom vessel upright with clearance below the cone for full drainage. The listed cone angle is 15 degrees...

The TC1517CK is a bolt-together steel stand made for the 10 gallon Chem-Tainer cone bottom tank. Because that tank drains through a 15-degree cone rather than sitting on a flat base, it needs a...

The Steel Stand for the 100 Gallon Chem-Tainer Cylindrical Tank is a fabricated steel frame built to seat a flat-bottom 100 gallon Chem-Tainer cylindrical vessel at working height. It stands 50...

The Chemtainer TC3036CK is a steel stand built to carry the 100 gallon cone bottom tank, supporting the tank's 15-degree cone while leaving clearance below the bottom outlet for gravity drainage and...

The TC6672CK is a Chemtainer steel stand built for a 1000 gallon cone bottom tank with a 15-degree cone. It measures 68" long by 66" wide by 72" tall and weighs 350 lb. Because the frame is matched...

The Steel Stand for the 105 Gallon Chem-Tainer Cylindrical Tank is a steel support frame built to cradle a flat-bottom cylindrical tank in the 105-gallon Chem-Tainer series. It stands 50 inches tall...

The Steel Stand for the 110 Gallon Chem-Tainer Cylindrical Tank is a steel support frame that lifts a flat-bottom cylindrical tank off the floor for cleaner drainage and easier access to the bottom...

The TC1516AK is a steel stand built to raise the 12-gallon Chem-Tainer cylindrical tank up off the floor to a workable height. It stands 50 inches tall on a 24 x 24 inch footprint, lifting the tank...

The TC4224CK is a steel stand built for the Chem-Tainer 125 gallon cone bottom tank with a 15-degree cone. A cone bottom tank cannot sit flat on the floor, so a matched stand carries the tank in an...

The Steel Stand for the 125 Gallon Chem-Tainer Cylindrical Tank is a steel support frame built to hold a flat-bottom 125-gallon Chem-Tainer cylindrical tank. It is a stand only - not a tank -...

This Steel Stand for the 15 Gallon Chem-Tainer Cone Bottom Tank is the matched support frame that lets the tank's 15-degree cone bottom drain from its lowest point. A cone bottom tank cannot sit flat...

The Steel Stand for the 15 Gallon Chem-Tainer Cylindrical Tank is a steel frame that raises a flat-bottom cylindrical tank off the ground. It stands 50 inches tall on a 24 x 24 inch footprint, sized...