The Norwesco 2100 Gallon Vertical Liquid Storage Tank (SKU N-41400) is a white polyethylene tank built for bulk water and liquid storage where you need real capacity in a compact, low-profile footprint. It holds 2,100 gallons, stands just 69" tall on a 102" diameter base, and ships empty at 295 lbs. This is the "without fitting" configuration (outlet listed as NO FTG), so the sidewall comes ready for you to install the bulkhead fitting your plumbing requires rather than paying for one you may not need.
Will it work for your job
The tank carries a 1.5 specific gravity rating, meaning the walls are engineered to hold liquids up to 1.5 times the weight of water. For plain water at 8.34 lbs per gallon, a full 2,100-gallon load is about 17,514 lbs; at the tank's maximum 1.5 SG rating the rated contents reach roughly 26,271 lbs. Those are the numbers your pad, ring, or slab has to carry — pour or level a foundation that supports the full 102" round footprint, not just the perimeter. The tank uses FDA approved resin and is rated to a maximum contents temperature of 120 F / 48 C. Top access is a single 16" lid — your one opening for filling, venting, level sensing, cleaning, and inspection, so plan those connections around it. The squat 69"-tall, 102"-wide profile keeps the center of gravity low, which makes filling and inspection easier and reduces the tall-tank anchoring concerns you get with narrow vertical tanks. If you are still weighing capacities or footprints, run your daily-demand math through the Tank Sizing Calculator and the Tank Sizing Guide before you commit — a 2,100-gallon vertical is a common size for rural water, irrigation reserve, and NFPA-22-style fire-water reservoir storage.
Freight and delivery
This tank ships LTL freight from Norwesco's plant in Washington Court House, Ohio. Because freight on a tank of this diameter is quoted by distance and destination, we quote it live to your ZIP rather than bundling it into the list price. Get a real number in seconds with the Freight Cost Estimator, or call 866-418-1777 and we will walk the delivery through with you — including liftgate and delivery-site access, since a 102" round tank needs room to come off the truck.
The mistake to avoid
Match the tank to the weight of what you actually plan to store. This tank is rated to 1.5 specific gravity, so verify your liquid's SG before filling — plain water is 1.0 and well within range, but heavier liquids climb toward that 26,271-lb rated ceiling fast, and anything above 1.5 SG needs a higher-rated tank. Equally important: this is the no-fitting version, so plan your outlet placement and choose a bulkhead fitting and gasket compatible with your liquid before install. For a deeper walkthrough of specs, siting, and plumbing on this exact size, see the 2100 Gallon Vertical Liquid Storage Tank Complete Buyer's Guide; if you need the same 2,100 gallons in a taller, narrower footprint, compare the 87" x 89" version. You can also confirm dimensions against the technical drawing on this page.
Ready to move on this 2100 gallon Norwesco vertical tank? Pull a freight quote to your ZIP with the Freight Cost Estimator or call One Source Plastics at 866-418-1777 to lock in your order and delivery.
Freight and documents
Ships from: Washington Court House, OH. LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Technical drawing (PDF) for Norwesco 41400.
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
