A 2 inch standard duty bulkhead fitting, installed at the Norwesco plant
Part number 63481 is Norwesco's 2 inch standard duty bulkhead fitting in polypropylene, sold here as the installed version. A bulkhead fitting is the port that turns a plain tank wall into a connection: the body passes through a hole in the wall, a gasket seals it from the inside, and the threaded end outside takes your valve, hose barb or pipe. Standard duty is Norwesco's regular 2 inch fitting, the one on most stationary tanks. Installed means Norwesco cuts the hole and sets the fitting before the tank leaves the plant. The fitting is about 3 inches across and weighs a pound.
Adding it to a tank order? Call 866-418-1777 with the tank part number and where on the tank you want the port, or get freight to your ZIP and add it to your cart with the tank.
What to check before you buy
- The tank. This is the installed version, so it goes with a new Norwesco tank on the same order. Tell us the tank part number and the position you want, and we confirm it before the order goes to the plant.
- The size. 2 inch. Match it to the valve, camlock or pipe you plan to hang on it; 2 inch is the common size for gravity drains and transfer pumps.
- Standard or heavy duty. Norwesco also installs a heavy duty 2 inch fitting. Standard is right for a stationary tank; choose heavy duty for a tank that rides on a truck or a trailer.
- The liquid. Polypropylene handles water, most fertilizers and many common chemicals. For anything aggressive, check the liquid against the material before you order.
Norwesco's drawing for this fitting is linked on this page under Technical Drawing. It shows the flange diameter and the hole size the wall needs.
After it arrives
The fitting comes already tightened in the wall, so your work is on the outside. Thread the valve in by hand with a sealant that suits the liquid, turn it so the handle is reachable with the tank in place, and support the valve and the first length of pipe so the fitting carries liquid, not hardware. Fill with water the first time and look at the joint inside and out. Keep a spare gasket on the shelf.
Shipping
Installed, the fitting travels on the tank from the nearest of Norwesco's plants. On its own it is a 1 lb part in an 8 by 8 by 8 inch carton by UPS. The listed price is before freight; the freight cost estimator gives the lane cost to your ZIP. Still choosing the tank? Start with the tank sizing calculator and tank sizing guide.
Freight and documents
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Technical drawing (PDF) for Norwesco 63481.
See this tank
Product video. Watch the Norwesco 2 Inch Standard Duty Bulkhead Fitting Installed video (58 seconds) with dimensions, fittings and shipping notes.
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
