Traffic & Work Zone Safety

The 03-10-3WAY6V Barricade Light is an incandescent, amber warning light that marks active work zones and channelizing devices after dark. Its bi-directional lens throws amber light in two directions, and the integrated photocell switches the unit on at...

The T-Boards 1" x 8" is a work-zone barricade panel used to channel traffic and mark hazards. This configuration ships as a 4-foot board sheeted on one side with high-intensity prismatic striped sheeting. Made of High Density Polyethylene, the board...

The DW Series 28" Orange Traffic Cone is a wide-body, injection-molded PVC cone built for high-visibility work zones where stability matters. Its one-piece design molds the base as one with the cone body, giving the DW ("wide-body") series a heavier,...

The DW Series 28" Orange Cone with 4" reflective collar is an injection-molded PVC channelizer built for high-visibility traffic control where a heavier, more stable cone earns its keep. As part of the DW wide-body series, it pairs a 28" profile with a...

The 24" LED Stop/Slow paddle earns its keep during school dismissals and lane closures, and this replacement battery keeps it working when the charge runs down. Instead of pulling a whole paddle out of service, crossing guards and flaggers can swap the...

The W Series 18" Orange Cone with one 6" reflective collar is a mid-height traffic cone built for daily channelizing and lane-delineation work on roadways, parking areas, and active work zones. Its wide body design gives it a stable footprint that...

The W Series 18" Lime Cone with a single 6" reflective collar is a high-visibility PVC traffic cone for daytime and low-light channelization on active work zones. The lime body reads clearly against asphalt and cluttered roadside backgrounds, while the...

The EZGrab 42" Dual Grip Delineator (SKU 03-734D) is a portable-or-permanent traffic channelizing post built for active work zones and roadways. At 42 inches tall with a dual-grip body and two 3-inch high-intensity reflective collars, it stays visible...

The DW Series 28" Orange Traffic Cone (SKU 03-500-51) is an injection-molded PVC cone for high-visibility work zones where a stable footprint matters. It ships with a black wide-body base and two reflective collars - one 6" and one 4" - placing...

The 18" Stop/Slow Paddle gives crossing guards, police, and plant security personnel a clear, two-sided traffic-control signal in a lightweight, easy-to-hold package. This model pairs a nonreflective corrugated plastic sign face with a 9" Polygrip...

The CONE CADDY (SKU 03-734-CADDY) is a small four-pocket carrier built to organize and transport delineators and channelizers around the work zone. At just 0.5 lb, it hangs onto your cone or channelizer and keeps small components stowed and within reach,...

The T-Boards 1" x 8" in the 10 ft unsheeted configuration is a High Density Polyethylene (HDPE) board supplied with no sheeting applied. As a bare 10-foot 1" x 8" board, it serves as the base component you configure with the sheeting option that fits...