Traffic & Work Zone Safety

The Teardrop Rotating Halogen Strobe (SKU 22-56525) is an amber warning light built to make service trucks, work vehicles, and equipment visible in active traffic and work zones. Its magnetic base drops onto any steel roof or panel in seconds and runs...

The TrailBOSS & TrailGuide Low Density Barrel drum (SKU 03-782) is a molded polyethylene channelizing drum for work zones, DOT projects, and lane closures. This configuration ships with no sheeting, giving crews a base drum to stripe with their own...

The 04-836O Tubular Surface Mount Delineator is a 36-inch orange flat-top marker built to hold its line in active traffic and work zones. Molded from 100% impact-resistant polyethylene, the post flexes on impact and springs back upright instead of...

The 04-836Y Tubular Surface Mount Delineator is a 36-inch flat-top marker built to take repeated impacts and keep standing. Its yellow tubular post carries white high-intensity prismatic sheeting for strong retroreflective visibility, and mounts to a...

The 04-836W Tubular Surface Mount Delineator is a 36" flat-top, surface-mount channelizer for lane and edge delineation in paved work zones. Molded from 100% impact-resistant polyethylene, the post absorbs repeated vehicle contact that would crack or...

The T3 Kit Single Upright (SKU 97-1700UP) is a Telespar Type III barricade configuration built for work-zone traffic control on DOT projects, road closures, and lane shifts. This upright option delivers a single-post Type III barricade assembly using the...

The Pack N Pop Collapsible Cone (SKU 03-500-80) is a 28" orange traffic cone for crews who need channelizing devices that store flat and set up fast. This unit ships with one 6" and one 4" reflective collar plus an integrated warning light, giving you...

The Pack N Pop Collapsible Cone (SKU 03-500-80NL) is a 28" orange traffic cone built for work zones that demand fast setup, quick teardown, and compact storage. This unit ships with one 6" and one 4" reflective collar for high-visibility daytime and...

The T-Boards 1" x 8" is a channelizing and barricade panel made of High Density Polyethylene (HDPE). This configuration is a 4-foot board sheeted on one side with Diamond Grade striped sheeting, giving crews a directional panel for lane closures,...

The T-Board 1" x 8" (SKU 97-01-019-04) is an 8-foot board used to channel traffic and mark hazards through active work zones. The 1" x 8" boards are made of High Density Polyethylene (HDPE) for durable, weather-tolerant service on the road. Sheeting and...

The EZ Grab Delineator Kit (SKU 03-747RBC) is a complete, ready-to-deploy channelizing unit for work zones, parking areas, and traffic-guidance applications where crews need a marker that stands back up after impact. It pairs a 45-inch EZ Grab flared...

The EZ Grab Delin Kit (SKU 03-747BRBC) arrives job-ready: a 45-inch flared blue EZ Grab post, a 10-pound base, and two 3-inch HIP collars in one 13-pound kit. It gives DOT contractors and work-zone crews a complete delineator for channeling traffic and...