Traffic & Work Zone Safety

The Plastx FF Barricade (SKU 97-501-502-05) is a Type II fold-flat barricade built on a rugged, heavy-duty design that holds up to repeated field use. Its fold-flat construction lets crews move, store, and redeploy units quickly across multiple job...

The TrailBOSS & TrailGuide High Density Barrel drum is a molded polyethylene channelizing device built for active work zones and roadway construction. This configuration (part 03-780-4EG) carries four 4-inch bands of Engineer Grade reflective...

The 18" Stop/Slow Paddle (SKU 03-855) is a hand-held crossing-control tool built for the people who direct traffic on foot: school crossing guards, police details, and plant security officers. This variant pairs a durable plastic paddle blade with...

The Plastx FF Barricade is a Type I fold-flat barricade. This configuration pairs a top sheet measuring 24" wide x 12" high with an unsheeted 24" wide x 8" high bottom panel, giving you an engineer-grade (EG) sheeted face up top (top only) while the...

The TrailBOSS & TrailGuide Molded Rubber Snap-On Base is the ballast that keeps your channelizer drums standing through wind gusts, passing traffic, and long work-zone deployments. At 30 lbs., it delivers the weight heavier setups demand and snaps on...

The TrailBlazer XL Valet Series in Lime is a molded high-density polyethylene traffic-control device built for valet parking lanes, work zones, and any setting where crews need a durable, visible marker that sets up fast and stores flat. Molded HDPE...

The T-Boards 1" x 8" ships as a 6-foot board sheeted on both sides, giving you striped sheeting on each face of a single unit for two-way visibility in the work zone. Built From High-Density Polyethylene The 1" x 8" board is made of High Density...

The Cone Bar Sign (SKU 07-900-5001) is a 24" x 24" nonreflective work-zone panel carrying the No Left Turn symbol in white. It mounts onto a cone bar barrier system, turning a run of channelizing cones and bars into a message-bearing traffic control...

The Cone Bar Sign (SKU 07-900-5002) is a 24" x 24" nonreflective "No Right Turn" symbol panel in white, built to snap onto cone bar systems and communicate turn restrictions across active work zones. At roughly 2 lbs, a single crew member can carry,...

The Cone Bar Sign in a 24" x 24" nonreflective format carries the No U Turn symbol on a clean white face, giving work-zone crews a fast way to post turn restrictions on a cone bar barrier system where traffic needs to read it. Built for the Work...

The Cone Bar Sign in the 24" x 24" nonreflective Do Not Enter configuration mounts a clear white symbol message onto your existing traffic cones. Weighing approximately 2 lbs and built from exterior-grade PVC, it turns a standard cone into a directional...

This Cone Bar Sign puts a clear No Left/U Turn message on top of your existing cone bar system. The 24" x 24" nonreflective panel, finished in white, tells drivers where they cannot go while the cone bars below carry the physical channelizing load. It is...