Traffic & Work Zone Safety

The Cone Bar Sign 07-900-5006 is a 24" x 24" nonreflective white panel printed with the "No Turns" legend for cone-mounted deployment in work zones and traffic-control setups. At approximately 2 lbs, it drops onto cone bars fast and travels light between...

The TrailBOSS & TrailGuide High Density Barrel is a molded polyethylene traffic drum built for daily work-zone duty. This configuration ships with four 6" Engineer Grade sheeting bands, the high-visibility banding crews use for lane closures,...

The EZGrab Sequential Solar Strato-Lite Delineator pairs a high-visibility delineator post with an integrated sequential solar warning light, giving DOT crews and work-zone managers a self-powered channelizing device that guides traffic through tapers,...

The Steelcade Barricade Type II combines steel legs with plastic panels for use in work zones, road construction sites, and lane closures. This unit ships with Engineer Grade striped sheeting applied to both sides, ready for immediate deployment...

The TrailBOSS & TrailGuide Orange High Density Barrel is a molded polyethylene traffic drum built for high-visibility channelization on active roadways and work zones. This configuration ships with four 4" hi-intensity prismatic sheeting bands for...

The Cable Guard Dropover (SKU 2080-DP-B) is a low-profile, single-channel cable protector that shields hoses, wires, and cabling run across pedestrian and light-traffic paths. Its black dropover design lays directly over a line and seats it inside one...

The EZGrab Delux Stackable Delineator pairs a 43" stackable orange post with a 10 lb rubber base and a red retractable cone topper, giving crews a single unit that works as either a portable or permanent channelizing device. Built from 100%...

The EZGrab Delux Stackable Delineator (SKU 03-710RBC-YCT) pairs a 43" stackable orange post with a weighted rubber base and a yellow retractable cone topper. It is built for DOT contractors, fleet operators, and facility and safety managers who need...

The 2042ECM is a male end cap that finishes a modular speed hump run. Molded from recycled rubber, it forms a clean, sloped transition at the end of the hump, protecting the assembly edge and guiding vehicle tires smoothly over the installation...

The 2043ECF Female End Cap finishes a modular rubber speed hump installation, capping the run where two hump sections meet or where a lane terminates. Molded from recycled rubber, it carries the same durability and reflective marking as the main hump...

The 04-48-OWG Tubular Surface Mount Delineator is a 48-inch flexible channelizer for lane definition and traffic guidance. Molded from 100% impact-resistant polyethylene, the orange post flexes under vehicle contact instead of shattering, so it keeps...

The 48" Tubular Surface Mount Delineator is a channelizing device for lane delineation in work zones, roadways, and parking areas. Molded from 100% impact-resistant polyethylene, this yellow post flexes on vehicle contact and returns upright, standing up...