The Bushman 200 Gallon Vertical Water Storage Tank (SKU 41520) is a compact green polyethylene tank built for reliable rainwater, process-water, and general water storage where floor space is tight. It stands 72 inches tall on a 30 in diameter, occupying a 30 x 30 inch square footprint, so it holds a real 200 gallons without sprawling across a pad or truck bed. Dimensions on this unit are verified — see the technical drawing on this page for the exact profile before you order.
Will it work for my site?
This is a vertical water storage tank, 72 in tall by 30 in diameter, holding 200 gallons. Filled with water it weighs about 1,668 pounds, so plan the pad and any transfer equipment around that loaded figure, not the empty shell. A tank this weight wants a flat, fully supported, level surface across the whole 30 x 30 inch base. If you are matching this tank to a daily-draw or reserve target, run the numbers through our Tank Sizing Calculator and the Tank Sizing Guide before you commit to 200 gallons versus a larger vessel. This unit is specified for water and general water service; for higher-density or chemical duty, call us and we will match you to a rated tank instead.
Set it up right
The common mistake with a tall, narrow vertical tank is the foundation. At roughly 1,668 pounds full on a 30-inch base, the point loading on the pad edge is real, and an unlevel or partially supported base is where these tanks crack over time. Pour or verify a proper slab sized for the load — our guide on concrete pad sizing for above-ground polyethylene tanks walks the ACI framework. Once installed, prove the tank before you rely on it using the method in our hydrostatic test methodology for new-install acceptance. Fitting and bulkhead configuration is confirmed at order against the drawing, so call the number below if you need a specific outlet or connection worked out. In cold climates, this size is a candidate for freeze-protection planning; the design discipline in our fire-water reservoir design guide applies to any cold-weather standing-water reserve.
Fits reuse and recovery trains
A 200-gallon vertical footprint drops neatly into small grey-water, rainwater, and HVAC-condensate collection setups where you need banded storage rather than one giant vessel — see our writeup on industrial water reuse tank topology for how tanks this size sequence into a treatment train.
This tank ships LTL freight, quoted live to your ZIP — the 1,668-pound loaded figure governs offload once filled, while the empty shipping weight governs the freight handoff, so confirm your forklift or liftgate access when you order. Get your number instantly with our Freight Cost Estimator or call 866-418-1777 to talk through pad, fittings, and delivery. List price shown here is before freight.
