Ronco Plastics 67H - 24 Gallon Plastic RV Holding Tank

Twenty-four gallons is a size Ronco molds exactly once, and the 67H is it. RV floor plans cluster their waste tanks at 22 and 25 gallons, which leaves the 24 gallon coach owner staring at near-misses in both directions; this molding is the direct answer. The blank runs about 25 pounds, and in service it holds gray or black water only, no potable duty ever.

Weight math for the mounting: 24 gallons at 8.34 pounds per gallon is about 200 pounds when full, arriving and leaving in surges as the tank fills and dumps. Make sure the floor or cradle that held your original is sound before the new tank goes in.

If 24 gallons was your coach builder's rounding rather than the real spec, bracket the size: the 33H holds 23 gallons in an 83 x 13.5 x 10 inch rail-run shape, the 31H opens the 25 gallon family, and the 45H spreads 25 gallons across 74 x 15 x 8.25. Full range: RV holding tanks. One Source Plastics is an authorized Ronco Plastics dealer.

Fittings

This holding tank ships with its outlet molded in, ready to plumb. Add the Ronco 3-inch uniseal (F3UNISEAL), a loose pipe-to-tank seal you press into the outlet yourself, with no threads or nuts.

Technical drawing: download the Ronco Plastics 67H dimensional drawing - print it to plan your install. The outlet is molded in. Add the Ronco 3-inch uniseal to connect it.