At about 22 pounds, the 95H is the lightest blank among Ronco's six 25 gallon holding tanks, which matters most at installation time, when you are the one holding it overhead in a wheel well with one hand while starting a strap bolt with the other. Capacity is the full 25 gallons; duty is gray or black water, strictly non-potable, like every waste molding in the line.
Empty weight is where the differences among the six end and geometry takes over. Compare your compartment against the dimensioned members of the family first: the 11H is the standard box at 37 x 20.25 x 11.5 inches and the 45H is the long shallow one at 74 x 15 x 8.25. The 31H and the rest fill the middle. Full weight is identical for all: about 208 pounds at 8.34 pounds per gallon.
Ronco has been rotomolding RV and marine tanks in Tustin, California since 1974, and they install spin-weld or threaded fittings wherever your plumbing dictates. Print the scale drawing below this description, mark the inlet, outlet, and vent, and order to your own sheet. The complete range is under RV holding tanks on the Ronco hub. OneSource Plastics is an authorized Ronco Plastics dealer.
Technical drawing: download the Ronco Plastics 95H dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.
Freight
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
