The Dura-Cast 250 Gallon Vertical Liquid Storage Tank in white is a straight-wall vertical polyethylene tank built for dependable liquid storage in a compact footprint. It holds 250 gallons and stands 85 inches tall on a 31-inch by 31-inch base, so it tucks into a tight corner of a pump house, utility room, or equipment pad while still carrying a useful volume. The vertical profile keeps floor space to a minimum, and verified dimensions plus the technical drawing on this page let you confirm clearances before you commit.
Will it work for your site
Filled with water at the weight of water (specific gravity 1.0), this tank weighs about 2,085 pounds. Plan a level, continuously supported pad rated for at least that load - a poured slab or a properly bearing, compacted base. A vertical tank must sit fully supported across its entire bottom; do not set it on skids, blocks, or an uneven surface that leaves the base bridging a gap. The 31 x 31 inch footprint makes it a good match for rain catch, non-potable water storage, irrigation supply, and general liquid holding where headroom is available but floor area is not. If you are still deciding on volume, run the numbers with our Tank Sizing Calculator and the Tank Sizing Guide, and see the 250 gallon vertical tank buyer's guide for a full walkthrough.
The mistake to avoid
This tank is specified for water and water-based liquids. The 2,085-pound figure is water only - a liquid denser than water raises the load on the pad and can exceed what a standard water tank is built to hold. Do not assume this tank is cleared for a heavier chemical without first confirming the required specific gravity rating and resin for that fluid. If you are storing anything other than water, call us at 866-418-1777 before you buy so we can confirm the right tank for the job. Fitting count, sizes, and outlet height for a plumbed installation are confirmed by phone before purchase - call and we will walk through your setup.
This tank ships LTL freight and is quoted to your ZIP code - get a live number with our Freight Cost Estimator or call 866-418-1777 for help with sizing, fittings, and delivery. Listed before freight.
Freight
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
