Ronco Plastics 15H - 33 Gallon Plastic RV Holding Tank

Ronco keeps four different 33 gallon holding tanks in production, and the 15H is the first stop in that family. Thirty-three gallons is fifth-wheel and Class A territory, the gray tank that has to swallow a week of showers, and the four shapes exist because big coaches package their waste bays in every configuration imaginable. This blank weighs about 29 pounds and serves gray or black water only; no potable use.

The load figure for mounting design is about 275 pounds full, 33 gallons at 8.34 pounds per gallon, cycling every trip. Confirm the envelope against the dimensioned member of the family first: the 52H at 46 x 16 x 12.75 inches if your bay is narrow and deep. Then the specialists: the 20H side-dump at 63 x 20.25 x 8.5 one gallon up, or the wide flat 3H at 64 x 32 x 8 two gallons up.

Every one is rotomolded at Ronco's plant in Tustin, California, in continuous operation since 1974, and every one ships with fittings installed per order, spin-welded or threaded at your marked positions. Print the drawing below this description, mark your inlet, outlet, and vent, or click them into the planner, and the tank is built to your layout. Full family: RV holding tanks. OneSource Plastics is an authorized Ronco Plastics dealer.

Technical drawing: download the Ronco Plastics 15H dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.