Forty-eight gallons puts the 60H at the big end of Ronco Plastics' RV holding-tank line, and the family around it is worth a look before you commit: the 48-gallon 92H holds the same volume in a different shape, the 47-gallon 97H gives up one gallon for another footprint, and the 50-gallon 91H is the next step up. Same capacity, different molds - the drawing decides which one fits your bay.
This is a waste tank, full stop: gray water or black water, plumbed downstream of the fixtures. It is not built or rated for drinking water, so if you are shopping for the fresh side of the system, start in the water-tank section instead of here. Full of waste, 48 gallons runs about 400 lb at water weight, so mount it over structure, not over floor skin.
Ronco has rotomolded these in Tustin, California since 1974, and every 60H ships as a blank 38 lb molding with fittings installed to your order - spin-weld or threaded, wherever you mark them. Print the drawing below, mark your fitting locations, and the tank arrives ready to plumb. Browse the rest of the RV holding tanks or price the shipment with the freight cost estimator.
OneSource Plastics is an authorized Ronco Plastics dealer.
Technical drawing: download the Ronco Plastics 60H dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.
Freight
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
