Skip to main content

Norwesco Inductor Tanks

Norwesco Inductor Tanks

Norwesco inductor tanks are small cone bottom polyethylene tanks used to mix chemicals and feed them into a sprayer or water line. They range from 15 gallons up to 110 gallons. The steep cone drains to a single outlet at the bottom, so the tank empties completely between batches. All are natural white and rated for liquids up to 1.5 specific gravity.

What people use them for

  • Mixing and loading herbicide and fertilizer into a sprayer
  • Small batch mixing in shops and plants
  • Rinse tanks for sprayer rigs

Sizes and cone angles

Sizes are 15, 30, 35, 40, 60, 65, 80, 85 and 110 gallons. Cone angles run from 40 to 60 degrees. The 40, 65, 85 and 110 gallon tanks are full drain tanks with a 2 inch threaded outlet. Most of the other tanks have a 2 inch bulkhead fitting at the bottom of the cone. Most tanks have a 16 inch manway, and the 15 gallon (60 degree) and 35 gallon tanks have an 8 inch lid. Check each product's specifications for the exact diameter, height and cone angle.

Steel stands

An inductor tank needs a stand to hold the cone off the ground. The Tank Stand line on each product page names the steel stand that fits, such as N-63397 for the 15, 30 and 60 gallon 57 degree tanks, or N-64229 for the 40 and 65 gallon tanks. The 85 and 110 gallon tanks are also sold as a tank and steel stand combo (N-40353 and N-40354). You can also shop Tank Stands.

Before you order

  • Order the stand. Add the steel stand listed on the tank page, or choose a tank and stand combo.
  • Check your chemical. Make sure it's compatible with polyethylene and weighs no more than 12.52 lbs per gallon.
  • Shipping. Many of the smaller inductor tanks may ship UPS from Sheldon, IA.
  • Not for fuel. Don't use these tanks for gasoline, diesel or any other fuel.

Questions we get

What's the difference between an inductor tank and a cone bottom tank?
Inductor tanks are smaller with a steeper cone, made for mixing and loading. For larger tanks, see Norwesco Cone Bottom Tanks.

Which stand do I need?
Check the Tank Stand line on the tank page. Stands are sized by tank diameter, so a stand for one tank may not fit another.

Do you have small rinse tanks?
Yes. See Norwesco Total Drain Rinse Tanks.

Call 866-418-1777 for help choosing a tank and stand, or get freight to your ZIP on any tank page.

  • Norwesco

    SKU: N-40354

    110 Gallon Inductor Tank w/Stand Combo

    $560.10
    The item has been added